Compact 4-Motor ESP Drone Frame with Battery Cradle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lightweight quadcopter frame for 10mm motors with a center cradle for ESP32 flight controller and battery.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a compact X-style quadcopter frame designed for building a small ESP-based drone. Four tapered arms with internal cutouts keep the weight low while holding their stiffness, and each arm ends in a round motor mount sized for 10mm motors. The center body is an open-top cradle with raised walls, slots, and small mounting holes for securing an ESP32 flight controller board and a small LiPo battery. Notches in the cradle walls leave room for wires, connectors, and a USB cable. The frame prints flat, so it’s easy to make on a standard FDM printer in PLA, PETG, or a flexible material like TPU for better crash resistance. It’s a good base for learning drone building, tuning, and experimenting with ESP-based flight control.