2020 Aluminum Extrusion 90 Pivot Bracket Plates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A flat pivot bracket plate for 2020 aluminum extrusion. A curved slot lets you swing and lock a member at an angle.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 8
- Wydruki
- 1
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
A flat bracket plate that ties a pivoting arm to 2020 aluminum extrusion. The plate has a row of mounting holes along one edge and a pivot hole with a curved slot near the corner. Put a bolt through the pivot hole and a second through the slot, and you can rotate the arm through the slot's range and lock it at any angle. It's useful for adjustable braces, tilting panels, lids, hatches, and angled supports.
Features
Right and Left Hand versions included
Three mounting holes in the thick strip for fastening to the extrusion
One pivot hole plus a curved adjustment slot
Stepped design: the mounting strip is thicker (4.78 mm) and the pivot section is thinner (4.01 mm), so a mating part can sit flush
Prints flat with no supports
Dimensions
Overall size: 76.2 x 76.2 mm (3" x 3")
Thickness: 4.78 mm mounting strip, 4.01 mm pivot section
All round holes: 5.5 mm, M5 clearance
Mounting hole spacing: 25.4 mm (1")
Hardware
M5 - 10mm bolts and M5 T-nuts or drop-in nuts for 2020 slot
M5 button head screws work well and sit low
A washer under the bolt in the slot is a good idea
Print settings I used
Printer: FDM, 0.6 mm nozzle
Material: PETG-CF
Orientation: flat on the bed, no supports
Tips
Print at least 3 walls so the holes stay strong around the bolts.
Print in PETG, PETG-CF, ABS, or ASA if the part will be loaded or used outdoors. PLA can creep under load.