Gridfinity box for M5Stack Core S3 SE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity box for M5Stack Core S3 SE, 2x2
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
About
I got a M5Stack Core S3 SE as a present and I decided to get a better stand for it.
Extra holes on the bottom 6mm diameter to allow putting the screws and screwing them in.
Photos from Sunlu PETG Coffee Brown that was pretty wet and printed very quickly, so it ends badly :D
Two options:
- full flat
- 45 degrees angled and slightly pushed to the back to allow extra stacks.
Magnets 6x2mm.
Screws M3, you need to chose one which are long enough to your stack.
Please like, create makes and add comments also to the original model, thanks!
Changelog
2026.10.12 - initial release
provided gcode is just for time and material estimations
0.2mm PETG 0.4 nozzle, stock profile, supports on the base plate only to avoid ugly artifacts in the thumbscrew areas
no brim, no supports, no skirt
Assembly
print
add M3 screws, watch out for the different lengths