Thrustmaster TH8S Shifter Secret Eject Button Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The button is hidden (unlike your secret agent ambitions)
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A custom knob with an eject button hidden under a secret cap for the Thrustmaster TH8S shifter (like a certain secret agent had in several famous films). Based on the official adapter files provided by @Thrustmaster.
Designed to be assembled easily without any additional tools or glue, using snap-fitting parts and print-in-place hinges. However, the model requires the printer to be tuned to do the following reliably (nothing out of the ordinary, but still needs to be noted):
20 mm unsupported bridges
0.2 mm tolerances
For authentic results, use the following colors when printing:
knob.stl – glossy black
button_insert.stl, cap_insert.stl – silver
spring_button.stl – red
Additionally, there're 2 internal slots for 4x2mm magnets so that the lid shuts with a satisfying snap. Just add a pause before these slots are sealed off by the next layer, insert the magnets when the print pauses and proceed. This is optional - the lid will still work without magnets.
Assembly instructions (see last image for reference):
Snip away the thin helper bridges on the hinge of knob.stl.
Gently work the hinge of knob.stl so that it moves freely around both axes of rotation.
Place spring_button.stl into the recess of the main part of knob.stl, with the button facing outward.
Snap button_insert.stl into the recess on top of spring_button.stl.
Snap cap_insert.stl into the recess in the cap of knob.stl.