Liczymy pasujące modele…
The Breacher is a 3d printed Nerf tube-magazine shotgun blaster that fires and ejects Silly Shells! It's spring powered, with a pump action prime. Yes, it actually fires multiple darts at once! READ THE "Print Info" SECTION of this…
Hello fellow nerfers! This is SKLEP mk1, my free time project I've been working on for the past month. This is a single firing string blaster that uses (and ejects) Flypoint/ Kirin shells. It fires half length darts. You can still use it…
Battle Axe is a 3d printed Nerf shotgun blaster that fires and ejects Silly Shells! Spring powered, pump action prime. Yes, it actually fires multiple darts at once! Changelog is at the bottom of the description text. Most recent update:…
IF YOU ARE BUYING YOUR HARDWARE KIT FROM BEARSWARES, PRINT THE REMIX! Read the guide before building a Shellfish! PDF in files! The Shellfish: A Silly-Shell blaster that does it all :) This is a spring-powered revolver shotgun/grenade…
Hello everyone! This is a 3D printed shell designed to work with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, and I have several ideas for fun parts to make for it. The first and most obvious…
FPS Optimized Rear Loading Shell ---> for Short Dart + Elite Dart for the X-Shot Excel Ejector Shell Blaster Load short darts into the shell without ramrod due to rear loading. Easy loading of the shells due to the optional loading tray…
Hello everyone! This is a kit for the X-Shot Excel Ejector Shell Blaster that allows the blaster to feed darts from a Talon Magazine. When I saw photos of this blaster before it was available, this is the modification I knew I wanted to…
i have tried every signal water powered vacuum generator printable available. non, not one works enough to work. mine does and i decided to use a shower hose connection. i measured the vacuum straight off the printer at 14 inches of…
The holder it comes with should be glued to the side but i didnt want to glue anything to it. Therefore i made a version that simply slides on the rail on the top. Simply glue the Lower Part to the Top part. To secure it you can use the…
This is a fully 3D Printed, ejection recovery system for 74mm model rocket fuselages. It consist of two parts, a tube (fuselage) adapter that connects the lower section to the top and also serves as the cap that will hold the shock coord…
got into the ranger reject manga and decided to model up the transforming pistol sword thingy they use. Category: Props
Hello everyone! These are some alternative reticle options designed to work with the scope that comes packaged with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, and while I like the scope reticle…
Plain Muzzle ---> Breacher - Shell Ejecting Nerf Shotgun Blaster Extend the clear shape of the Breacher all the way to the front with this plain muzzle. ------------------------------------------------------------ The file is already…
Caps for the JRready microfit removal tools https://www.amazon.com/gp/product/B0C4PTWP8G/ref=ppx_yo_dt_b_search_asin_title
A click in place extension for the Plannja foldable rain water ejector.
Add a touch of humor to your keys with this quirky 'Pull to Eject' keychain! Perfect for those moments when life gets a little too real and you wish you had an escape hatch. 3D-printed and built to spark conversations, it’s the ultimate…
I test fit the ejection port front and back together, when I pulled them apart the pegs snapped off of the ejection port front. I did not want to spend another 7 hours printing a new part so I made these pegs that will help hold the 2…
u bought a floppy drive and the eject button is on the opposite side than the case cutout? download this and fix that problem!
fun lil remix
General: A simple fake eject button for car electrical outlet. There are two versions. One for MMU, and the other for single material. The single material can be filled or coated with an inlay, like fingernail polish for single material…
Hello fellow nerfers! This is SKLEP mk1, my free time project I've been working on for the past month. This is a single firing string blaster that uses (and ejects) Flypoint/ Kirin shells. It fires half length darts. You can still use it…
This is a pilot g2 reloadable add-on, it inserts inside the cartridge with the button and other thing removed.
For one of those few times when you need to eject your sim card. Attaches to your key chain which also locks the cover from opening.
Hangar9 20cc Bronco Ejection seat, with a bit more detail than the plastic lawn chairs included with the kit. there are a number of pieces and you will have to assemble, I used epoxy, the included photo gives and idea of the assembly
Hello everyone! This is a 3D printed shell designed to work with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, and I have several ideas for fun parts to make for it. The first and most obvious…
Hello everyone! This is a 3D printed replacement stock designed to work with the X-Shot Excel Ejector Shell Blaster. I've been having tons of fun with this blaster, but the stock was a bit too short for my liking. So, I set out to design…
Hello! Releasing my first model for public consumption in the form of a quick deadspace filler for the X-Shot Ejector. This will require you opening up the blaster and the plunder tube assembly, but the part friction fits with the system.…
1-6 numbered eject Buttons for the vertical mounted Prusa Mk3/4, Bambu X1C, P1, A1 Build Plate holder from Frantisek23 Printing recommendation: PETG, PLA might also work 3 perimeters 20 % infill, Gyroid no supports
FPS Optimized Rear Loading Shell ---> for Short Dart + Elite Dart for the X-Shot Excel Ejector Shell Blaster Load short darts into the shell without ramrod due to rear loading. Easy loading of the shells due to the optional loading tray…
Iron Sights -- X-Shot Excel Ejector Shell Blaster Hardware free. Picatinny rail mounted. I adapted my one piece iron sights bar so that the shape and length fits the rail of the X-Shot Ejector. Other X-Shot Ejector Shell Blaster stuff:…
This is a jig for laser engraving AR-15 dust cover/ejection port covers. Remember to flip your images 180 degrees when using this jig and engraving the inside of the cover! SCALE IT DOWN TO 10% OF THE SIZE BEFORE PRINTING...
This print expels a nespresso pod instead of the bucket that comes with the machine that gathers the pods in the back. Machine Type: Nespresso Vertuo Plus Deluxe Coffee and Espresso Maker by De'Longhi.
The finger type piece for ejecting the shells might need a bit of sanding to fit into the pump grip and will require to have the pin fitted in to it the shell ejector has been smoothed to interface better with the finger and this model…
This is a ejector pin that I can keep safely nearby, Preferably on a keychain
Releasing this master assembly of OTTOeject MK1 under OCL License. Please take note of the Open Community License and it's attributes. This is a plate changing system and simple automation solution that allows you to automate desktop 3D…
Safety Disclaimer This began as an April Fool's project--do not shoot Sillyshells at people or animals. Nobody wants a hunk of plastic hitting their head at 30mph. Depending on the material you shoot at, your shells could chip or break.…
I have a Change Control Joke, But CAB Rejected It! Category: Office
Here are 3D printable files and the original PNG design for a political protest poster featuring "Boston: Rejecting Monarchy Since 1776" in old-style lettering. It's ideal for an attention-grabbing poster to carry during a No Kings…
This is a REMIX of @MelBlaster_903261 's Barrel Mod. This REMIX moves the barrel closer to the bolt and adds a tighter squeeze to the dart. There is an added collet to the front of the barrel holder as well to secure the barrel better and…
Got some suggestions to also create a ejection effect part for Blaster after we did one for Soundwave, so here we go! This is the main piece is tape shaped and goes into Blaster's chest. It has a simple shape which can be either printed…
I had this uploaded on Makerworld originally, but they have started removing toy guns so I will try it out here. Step 1: Step 2: Step 3: Step 4: Step 5: Step 6: Step 7: Step 8: Step 9: Step 10: Step 11: Step 12: Step 13: Step 14: Step 15:
Caps for the JRready microfit removal tools https://www.amazon.com/gp/product/B0C4PTWP8G/ref=ppx_yo_dt_b_search_asin_title
A shelf to screw into a desk or other surface for holding build plates sized for Prusa XL with a button for ejecting the sheets. As these plates are much bigger, I decided to use two eject buttons instead of one. To make this, print the…
I found the PushRod included with @chewey's seesaw mechanism (linked as remix source, below) was too short, leaving “slop” in the mechanism and preventing full eject actuation. This model is simply a lengthened version of that one part,…
Dust Ejector Valve CH20 CH22 CH23 CH25 CH640 CH670 Replace 2446207S 24-462-07-S 11065-7008 6655938 K1211-82340 Used on many model. If you don't know what it is, you probably don't need it. I was too cheap to order replacements for my skid…
print all of it with supports except for the bullet and stock and maybe bolt
The plastic lever to eject film holders on my HS-1800 was broken off, so I made a new one.
Big update: New, Simple Version of The FNT Plates storage for Prusa MK3/4/Core One has been released. You can find it here. Hi, A have many build plates for both Prusa and Bambu printers and very limited space for storage. So I decided to…
Tilt Blocks For Your Bambu Lab A1 Tilts the printer 20 degrees I use simplyprint as my software for auto ejection Print with at least 3 walls and 10% infill
Limbs are mounted tightly. Various body versions with higher tolerances (0.1 works well for me on the Prusa MK4 PLA). The bundle contains a body in version 0.1 tolerance. Different versions of limbs and faces - choose your favorite to…
Widened for 63 mm wide cards.
Alternate print for the Noctua fan mod. Single print.
Summary This is a stackable rack for the 70.5mm diameter type A container in the AxioT system with ejector buttons per 2U of rack space. Unit Type This rack fits the A705 container variant with a unit length of 6mm/ U and provides 24U of…
Summary This is a stackable rack for the 70.5mm diameter type B container in the AxioT system with ejector buttons per 2U of rack space. Unit Type This rack fits the B705 container variant with a unit length of 7mm/ U and provides 24U of…
If you haven't, here is the blowback model to incorperate parts into: https://www.printables.com/model/1023577-g26-blowback-version This is a quick demo: (tutorial down below) Assembly: DISCLAIMER: This model is very this is a non firing…
If you haven't, here is the blowback model to incorperate parts into: https://www.printables.com/model/1023577-g26-blowback-version This is a quick demo: (tutorial down below) Assembly: DISCLAIMER: This model is very this is a non firing…
Material PLA Layerhöhe 0,25 mm / Infill 20 % / Support 5% Zusätzliches Material / additional material: Sechskantschraube / hexagon screw / 2 / M6x20 mm DIN933 Mutter / nut / 2 / M6 DIN934 Gutes Gelingen und über ein Like würde ich mich…
PUMP-2000: Customizable, Shell-Ejecting Toy Blaster (Plinker V3.5 Series) This is a toy that fires a projectile! Never fire at pets or unwilling participants. This can damage drywall, use caution and protective eyewear. Never brandish…
Note: This is a prototype and may lack the fit and finish that is desired I was inspired to start this project when seeing a commercial for a slim credit card wallet. The advertised product had a neat lever that ejected card for quick…
Reproduction of the Snag Bars safe-d - Anti Ejection System from Delkim, simply add the bars (metal rod) 4mm in diameter and 106mm long. Reproduction du Snag Bars safe-d - Système Anti Ejection de chez Delkim il suffit d'ajouter les…
Simply Dillon case ejector. Works with or without additional plate bearings. Also required M4 screw and nut. UPDATE: added "stronger" version 1.3 for weaker materials. If you are going to print using quality PETG v.1.2 is ok. ANOTHER…
This is a fun little eject button. You need to print it in 3 pieces. You are able to print the letters in a different color with an single extruder by pausing the print right when the letter start/stop printing and changing the filament…
Another Stagg EKG Kettle elevator to offer space to put your scale under. I had trouble getting my lovely little Normcore scale out from under the original model so I added this optional sliding bar. To use scale ejector: You need to grab…
german, english below: Modifizierte und optimierte Version für die einfache Entnahme des Shelly-Relais! (v2.0) Dies ist eine modifizierte einfache DIN-Schienenhalterung für die Shelly Plus Familie oder ähnliche Smart-Relais. Mit diesem…
I made this to mount the sheet holder print to the underside of my lack enclosure. It takes M3 nut and screw to hold it.
Many thanks to Frantisek23 for the beautiful buildplate-holder ! In order to be able to print the number buttons in two colors , the numbers are required. Unfortunately, these are not included in the print files. That's why I'm supplying…
Use of the ejection rod for Tools in headstock or thread-rod for securing my drill-chuck in headstock always sucks, because the inner diameter of the mounted handroller ("handwheel") doesn't match the diameter of the spindle. So i made a…
No supports or brim needed. Development notes: Inkscape was used to convert an image into an SVG file Imported SVG as Grease Pencil into Blender To Do: Update the cutout (center) with fewer vertices. Not on the model - update the text so…
The shipping dewar positional cooling device (SDPCD, known as the ‘Cajun Ejector’) is a 3-D printable device that can assist cryopreservation with various standard cooling rates by use with existing standard shipping dewars. Efforts in…
The shipping dewar positional cooling device (SDPCD, known as the ‘Cajun Ejector’) is a 3-D printable device that can assist cryopreservation with various standard cooling rates by use with shipping dewars. Efforts in development of…
Nice little sigaret container with a sigaret ejector on both sides. I printed mine out of PC but most materials will do, but i noticed that PLA isn't stiff enough to eject a sigaret without the ejector deforming. After printing you need…
I added a micro push button socket to one of the hexagonal holes
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
The nozzle scubber is also used to eject filament that is pooped onto a poop-shelf. The scubber has a moving head riding on 6 small bearings that pushes any poop off the poop-deck during the scrubbing motion. I recommend covering the…
This is a pilot g2 reloadable add-on, it inserts inside the cartridge with the button and other thing removed.
I noticed the ejector was just a bit too small and it prevented 5x elite silly shells from firing. Now it's widened a bit so they should fire no problem! (If a bit weak… because its just a pilot plunger volume)
If using with a printed replacement top shell, I found best results printing at 103.5% scale in both axis to make the button wider, not taller.
Ejector with threaded fittings and mounting plate. compressed air inlet: ¼'' outlet: 3/8'' media inlet 6.1 mm for pushlock tubing.
I was having trouble getting my pilot to eject some of my more dense shells, so I made the travel on the ejector a bit longer. This file also has the Yeethammer notches since I didn't want to bother making a non-notched version.
Replacement for broken ejection catches on Fujitsu magneto optical drives.
Earplug case with automatic ejection when opened. Print with PETG plastic. Nozzle: 0.4 mm Layer: 0.16 mm Infill: 15% Use 1.75 mm diameter filament as pins during assembly. 1. Connect one end of the connecting rod to the pusher with a pin…
This model is an ejection seat for the L-39 Albatros jet from customwings.cz in scale 1:3.5. The seat's size had to be adjusted a little bit to fit into the cockpit of the customwings model because the cockpit is a little bit smaller as…
Cactuar planter. Sized for a 4 inch nursery pot. Non original design - I took the original model, and cut a hole in the bottom, and then made an associated insert tray that allows for the easy removal of the pot inside the planter. I have…
This is an old design, but figured I might share it. The can crusher by ColgS3b is nice, but I noticed sometimes, depending on how the can crushes, it can get stuck. So I modeled this up to be inserted through the bottom to help eject the…
This is an open Beta testing model for a replacement to the stock poop ejector. The original stock poop ejector has a tendency to bend, or lose alignment which can cause the nozzle to get stuck causing belt skips and breaks at the ceramic…
This project is sponsored by PBCWay so might as well check out their services: And if you want to get the whole pen in metal. Use the STEP/STP files to get a quote from them (reminder to use a flexible not soft material for the extractor,…
💿 CD rack storage with push button ejection, to grab your favourite CD's seamlessly. 🖼 Can be hooked onto an IKEA Skadis Pegboard, also key holes for wall mounting. 🖨 Working model printed using PLA with 0.2mm layer height. ❓ Any…
This is a Gridfinity-compatible holder specifically designed for the HSC8 6-6A crimping tool. The download includes two versions: One with an ejection hole at the bottom for easier tool removal. One without the ejection hole , for a…
This is a Gridfinity-compatible holder designed for the LA322024 automatic wire stripper, commonly used for stripping insulated electrical wires in workshop or DIY environments. The download includes two versions: One with an ejection…
Pivot this rubber stamp side-to-side to alternate between approve and reject. Print this Approve / Reject Stamp using a FLEX material. The stamp shown in the photos was printed using Matterhackers Grey TPU. The settings are shown in the…
The lower holder is very difficult to remove. This ejector helps here Der untere Halter läßt sich nur sehr schwer entfernen. Hier hilft dieser Ausstoßer It would be nice if you post your make. Thank you
Stamp with eject system + base for your stamps
SIM ejector pin holder modeled in Fusion360 Simple to print and mount Fusion360 video:
This is a modification of Surfalex2000 's Exit Filament files. I trimmed out a lot of the fluff that was unneeded, added in my centering to ensure the print head is in the center, fixed the comments on each line, and changed the speed to…
This is the first version, it's not 100% perfect but good enough for me now, but maybe not to your full expectation :) Need some time, feedback and will do a refinement once I have some time and testing. It's good for me now Maybe it is…
