TremorGuard – Adaptive Keyguard for Logitech MX Keys
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keyguard for MX Keys: rest your hand on it and press only the key you aim for. Helps with tremors.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 6
- Wydruki
- 1
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Typing on a flat keyboard can be difficult with tremors, spasticity or limited fine motor control. This keyguard sits above the keys and gives your hand a place to rest, so you press only the key you aim for.
61 key openings for the main typing block of the Logitech MX Keys
Raised web between the keys to prevent accidental presses
11 mm perimeter skirt that holds the plate above the keycaps
Split into two halves so it fits on small printers (147 × 104 mm each)
Two dovetail keys join the halves, no screws needed
Fully parametric: key pitch, web width, plate thickness and skirt height are easy to change
Material: PETG recommended, PLA works for testing
Layer height: 0.2 mm
Perimeters: 3
Infill: 15 %
Supports: none (print plate-side down)
Print 2 × keyguard half, 2 × dovetail key