Articulated Chair-Mounted Keyboard Tray (Assistive Tech)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
an articulating mountable keyboard tray to hold, raise, lower, position, and extend keyboards for chair/wheelchairs
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
this is possibly an overengineered Articulating keyboard tray designed to be attachable to chairs or wheel chairs really anything you can get the clamps over. i did have low mobility in mind when designing this as a helping device to bring the keyboard to people who have trouble leaning forward or cant at all.
i have been working on this for a wile now prototyping. i have printed and failed many tests and redesigned several times and i think it should be ready for full scale printing. however, i do not have the resources currently to print it full size like i want to. but i printed it successfully at about 40-35% scale. all the threads seem to be working and the concept holds true. im concerned about the weight of heavier keyboards so if you decide to print this and have a extremely heavy keyboard proceed with caution. im just a learning hobbyist so there is a chance it isn't perfect. (4a) (3a) (1a) are all the same part i just included them this way for clarity.
i printed all my tests in PLA on .3mm profile with fan at 100% and flow rate at 95% the parts do require supports unfortunately. just print everything on the flattest surface available on every part.
the bolt models can be separated easily in slicer
assembly is pretty easy:
tools 3/8ths wrench or 3/16th allen wrench for 4a, 3a and 1a
6 circle part with the long channel goes into the round socket with the rail in part 1.
part 2 does the same as 1 but on the other side of part 6. just press them all together. then screw in 2 bolts (4a, 3a, or 1a) [they are all the same]
put the large nut (6a) over the ball joint (6) smaller hole side facing away from you. press the ball joint into the socket of part (5) and press the nut down (6a) and tighten it onto (5)
3 and 4 can be screwed onto there respective sides (the lip on the bottom is your indicator) using the bolts (4a, 3a, or 1a) as needed if you are right or left handed. or you can screw them both on to extend for longer keyboards.
to clamp onto things (5b) slides into the channels on (5) and the long bolt on (5) goes into the hole on (5b) and then (5a) is used on the long bolt to tighten it down
7 goes in the channel in the back of (1) and (2) there is a hole in the top. just slid it in. to tighten it in place use (7a) and thread it onto the split threads of (1) and (2) on the top in the center. slide the stabilizer in to the top of your keyboard and screw (7a) down until its tight.
(8) and (8b) go together using bolts (8a) to use the extension arms keep the ball joint in and assembled on the main body [(1) and (2)] then press the ball joint into the socket of (8) and tighten down the nut (6a) [you will need to print a second 6a when using the extension arms] put another 6a over the ball joint on the arm (8b) and press the ball joint into the part (5) and tighten the nut (6a) onto the socket of (5)
the same assembly goes for the shorter extension arm (9)