Deep Space Probe Mini (Voyager style), free one piece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Free one piece mini Voyager style probe, about 1:50, with dish, booms and RTGs. Prints flat, no supports.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
Not test printed: this mini has not been test printed yet. It is checked in software only and the picture is a render.
A small Voyager style deep space probe that prints in one piece. It is a display model and an original design, not a licensed replica, with no agency logos.
What it is
A ten sided bus with a 72 mm dish on top, a feed horn and a sub reflector on three struts. A lattice science boom with a scan platform and two cameras, a boom with three finned RTGs and a shortened magnetometer boom all lie flat on the bed, and a small raised disc on the bus nods to the record. It is about 1:50 and roughly 134 x 104 x 40 mm.
Printing
One STL, already in its print orientation. No supports, no AMS. PLA, 0.2 mm layers, 3 walls, 15% infill. About 28 g and 1.8 hours (estimate, not slicer output). The magnetometer boom is thin, so a brim or a slower first layer helps.
Want the big one?
The full Deep Space Probe Desk Model (Voyager style) is about 1:20 with a 183 mm dish, separate booms, a standing RTG stack, a gold record style disc with an original pattern, and a round stand with a thin rod and an embossed roundel. It is EUR 3.49 on Cults3D: https://cults3d.com/en/3d-model/various/deep-space-probe-desk-model-voyager-style
More models and a few small games at dexmlabs.app.
Honest notes
Not test printed yet. Checked in software only and the picture is a render. Grams and hours are my estimates, and your printer may differ by 20% or more.
Happy to tweak the design on request.