Deep Space Probe Mini (Voyager style), free one piece
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Free one piece mini Voyager style probe, about 1:50, with dish, booms and RTGs. Prints flat, no supports.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial
Not test printed: this mini has not been test printed yet. It is checked in software only and the picture is a render.
A small Voyager style deep space probe that prints in one piece. It is a display model and an original design, not a licensed replica, with no agency logos.
What it is
A ten sided bus with a 72 mm dish on top, a feed horn and a sub reflector on three struts. A lattice science boom with a scan platform and two cameras, a boom with three finned RTGs and a shortened magnetometer boom all lie flat on the bed, and a small raised disc on the bus nods to the record. It is about 1:50 and roughly 134 x 104 x 40 mm.
Printing
One STL, already in its print orientation. No supports, no AMS. PLA, 0.2 mm layers, 3 walls, 15% infill. About 28 g and 1.8 hours (estimate, not slicer output). The magnetometer boom is thin, so a brim or a slower first layer helps.
Want the big one?
The full Deep Space Probe Desk Model (Voyager style) is about 1:20 with a 183 mm dish, separate booms, a standing RTG stack, a gold record style disc with an original pattern, and a round stand with a thin rod and an embossed roundel. It is EUR 3.49 on Cults3D: https://cults3d.com/en/3d-model/various/deep-space-probe-desk-model-voyager-style
More models and a few small games at dexmlabs.app.
Honest notes
Not test printed yet. Checked in software only and the picture is a render. Grams and hours are my estimates, and your printer may differ by 20% or more.
Happy to tweak the design on request.