IKEA SKADIS Hex Key Holder – 1.5–10 mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Labelled holder for metric hex/Allen keys 1.5–10 mm for the IKEA SKÅDIS pegboard.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Every hex key in its own labelled spot. A holder for metric hex keys (Allen keys) for IKEA SKADIS pegboards.
Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports.
Features
Sizes 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10 mm
The long arm goes through the hole, so every key sits in its own spot
Every size is labelled
Mounting
Two Universal Pegs are already on the print plate, no extra download needed. Hang the holder with the 2 pegs, spread the side arms slightly and click it in. Separate pegs print in their strongest orientation, so the hooks don't snap off.
More for your SKADIS board
SKADIS Drill Bit Index – 19 labelled slots, 1–10 mm
SKADIS Screwdriver Holder – 10 slots, 6.5 and 10 mm
SKADIS Pliers Holder – for pliers and cutters
SKADIS Bin Set S/M/L – three sizes with label field
SKADIS Tilt Bin – flips open, closes by itself
See all of them in my collection: Skadis hardware
If you print it, I'd love to see a photo in the comments or as a Make!
