1 / 4
IKEA SKÅDIS / SKADIS Drawer Tower – 2 Drawers — zdjęcie 1
1 / 4

IKEA SKÅDIS / SKADIS Drawer Tower – 2 Drawers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A small cabinet with 2 drawers for the IKEA SKÅDIS pegboard.

Ocena
0 / 5
Polubienia
3
Pobrania
5
Wydruki
0
Wyświetlenia
31
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A small cabinet with 2 drawers (80 x 68 x 43 mm inside each) to mount to an Ikea Skadis pegboard. Perfect for screws, small parts, SD cards or anything that should stay out of sight. Insert the pegs through the upper compartment before you slide the drawers in. Two of my Universal Pegs are already on the print plate – no extra download needed. It is easy to print and uses special pegs that I have designed. These can be found here: 

Skadis/ SKÅDIS universal peg

The reason for a separate peg from the organizers is that it enables you to design different plates if you get another type of board in the future without having to throw away the organizers. In addition, the optimum print alignment can be used and the hooks do not break off as easily as with many other designs

It is designed for digital calipers and will maby not fit all calipers.

If you would like to see more of my designs for the Ikea Skadis board, I have created a collection here: 

Skadis hardware

I'm always happy to receive feedback!

Tagi