Samsung Refrigerator French Door Flipper / Mullion Repair Cap - If top spring tab is still intact
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a reinforcing repair cap for a Samsung Refrigerator French Door Flipper / Mullion - (model RF260BEAESR/AA)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Samsung refrigerators are notorious for having parts break (and for making replacement parts very expensive, if they can be found). The flipper or mullion is a swinging arm that seals the gap that is in-between the two French doors on many Samsung refrigerators. Apparently, this part, or a sub-part, breaking is a common occurrence. My refrigerator is model RF260BEAESR/AA, but the original model designer states that the original model, from which this remix is made, fits many Samsung models. My flipper housing broke at the top, due to inadequate plastic material on both sides of a spring-loaded tab (which helps guide the flipper and have it swing closed -- see photos). This plastic housing helps support and reinforce the spring tab. I am guessing that once the housing breaks, the unsupported spring tab would be next to follow. The original model is designed to replace the broken spring tab. This remix is a repair and reinforcement of the housing itself, to allow the OEM spring tab to continue to function.
I printed this remix repair cap with PETG HF, 0.4mm nozzle, 0.12mm layer height, 100% infill. The cap fit on without any adhesives. If needed, double-side adhesive tape would hold it more firmly.
Thanks to PolymerToad for the original design.