Toy Car Replacement Towbar / Hitch Adapter (M3, Parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric replacement towbar for broken toy cars, trucks, or tractors. Mounts with an M3 bolt and nut
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 2
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Public Domain
Broken or missing towbar on a kid's toy car, truck, or tractor? This compact, sturdy adapter replaces a snapped-off plastic hitch using standard M3 hardware.
Key Features & Dimensions
Towbar pin: 4.0 mm diameter, 10.0 mm height, with a 4.4 mm tapered retaining tip so trailers stay hooked during play.
Base plate: 25 × 10 × 4 mm with rounded corners.
Hardware required: 1× M3 bolt (length depends on chassis thickness, usually 10–16 mm) and 1–2× M3 nuts (DIN 934).
Easy assembly: Features a 3.4 mm through-hole and a top-side hex pocket that holds the M3 nut flush without needing supports during printing.
Parametric: The
.scadsource file is included (requires the BOSL2 library), allowing you to easily customize pin diameter, length, or plate dimensions for any toy.
Installation
Drill a 3 mm hole in the bottom chassis of the toy vehicle.
Insert an M3 bolt from the inside of the body (optionally secure it to the chassis with a first M3 nut).
Slide the printed towbar onto the protruding bolt on the outside and tighten an M3 nut into the top hex recess.
(Tip: Use a nyloc nut or a tiny drop of threadlocker/superglue on the nut threads so it doesn't loosen during play).
Print Settings
Material: PETG (recommended for toughness and slight flex) or PLA
Supports: None
Layer height: 0.2-0.3 mm
Perimeters / Walls: 3–4 (important for pin strength against bending/shear)
Infill: 40–50%
