Toy Car Replacement Towbar / Hitch Adapter (M3, Parametric)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric replacement towbar for broken toy cars, trucks, or tractors. Mounts with an M3 bolt and nut
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 2
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Public Domain
Broken or missing towbar on a kid's toy car, truck, or tractor? This compact, sturdy adapter replaces a snapped-off plastic hitch using standard M3 hardware.
Key Features & Dimensions
Towbar pin: 4.0 mm diameter, 10.0 mm height, with a 4.4 mm tapered retaining tip so trailers stay hooked during play.
Base plate: 25 × 10 × 4 mm with rounded corners.
Hardware required: 1× M3 bolt (length depends on chassis thickness, usually 10–16 mm) and 1–2× M3 nuts (DIN 934).
Easy assembly: Features a 3.4 mm through-hole and a top-side hex pocket that holds the M3 nut flush without needing supports during printing.
Parametric: The
.scadsource file is included (requires the BOSL2 library), allowing you to easily customize pin diameter, length, or plate dimensions for any toy.
Installation
Drill a 3 mm hole in the bottom chassis of the toy vehicle.
Insert an M3 bolt from the inside of the body (optionally secure it to the chassis with a first M3 nut).
Slide the printed towbar onto the protruding bolt on the outside and tighten an M3 nut into the top hex recess.
(Tip: Use a nyloc nut or a tiny drop of threadlocker/superglue on the nut threads so it doesn't loosen during play).
Print Settings
Material: PETG (recommended for toughness and slight flex) or PLA
Supports: None
Layer height: 0.2-0.3 mm
Perimeters / Walls: 3–4 (important for pin strength against bending/shear)
Infill: 40–50%
