Printer front bracing ,for most gantry printer. simple design!!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my design for the bracing frame for the CR-10 printer. There are two types of adapters: the lower adapter is…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 462
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my design for the bracing frame for the CR-10 printer. There are two types of adapters: the lower adapter is designed to connect to the existing M5 screws of the frame, the top adapter with holes for M4 screws, for connecting to the upper bridge.
Since I used the M8 threading rod, I designed a 8mm ball valve and 8mm ball valve with internal thread.
For most printer bottom frame scre screw is M5 so print part : BotFrameHolderM5
For some E12 bottom frame scre screw is M6 so print part : BotFrameHolderM6
In case that you have a wider fun like FANG, use the TopFrame V2 support.
Suitable for printers :
ADIMLab
Alfawise U10/U20
ANET E10/E12
Athorbot A01 Creality CR-10/CR-10S
FLSUN Plus/FL
Geeetech A30
HUAXU3D X1
JGAURORA A5X
KOHON KH01
KREATEIT KR - 10S
Lavewatch LW - 10A
RAISCUBE R10 / T8 / T9
TEVO Tornado
Tronxy X3/X3ST/X3SA
ZONESTAR Z8XM2/Z10M2
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
30%
Filament: Tesla PLA
Category: 3D Printer Accessories