E3D v6 dual 4010 fan duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dual 4010 fan duct for E3D v6 setups Optimized for ease-of-use and broad compatibility with different setups
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 293
- Wydruki
- 0
- Wyświetlenia
- 2293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Dual 4010 fan duct for E3D v6 setups
Optimized for ease-of-use and broad compatibility with different setups. If you have any requests or suggestions, leave a comment and I'll see what I can do!
Features:
- Unobstructed front, so you can see if the first layer is sticking, and can access with tweezers to remove blobs while printing
- Duct snaps on/off for quick nozzle changes and hotend maintenance. Optional zip tie for extra security
- Compact design, compatible with most extruders including E3D Titan, Bondtech BMG, and Orbiter
- Dual 4010 fans, cooling from both sides
- 40mm heatsink fan, much quieter than 30mm fans
- Prints without supports
Printed parts:
- Base
- Fan duct left
- Fan duct right
- zip tie holder (optional)
BOM:
- 6x M3 10mm screws
- 6x M2 10mm screws
- 2x 4010 centrifugal blower fans
- 1x 4010 axial fan
- Zip ties
Print settings:
- Line width: 0.4mm
- Layer height: 0.2mm
- Perimeters: 3
- Orientation: pre-oriented in the stl file
- Material: ABS or PETG for the fan ducts