Ikea Lagkapten/Linnmon Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connect two Ikea Lagkapten or Linnmon together using the existing screw holes.
- Ocena
- 5 / 5
- Polubienia
- 64
- Pobrania
- 348
- Wydruki
- 6
- Wyświetlenia
- 3157
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a connector bracket for Ikea’s Lagkapten and Linnmon desk system. It allows you to connect two of the desks together side by side using the existing pre-drilled holes.
The bracket is compatible with both Adils and Olov legs and can also be used when no legs are attached. I don’t recommend using this with no legs at the join, but you could put the legs at the back of the desk and leave the front open like I did.
To use this bracket you’ll need to replace the screws that Ikea provides with longer ones. I used M4x40 screws.
Make sure you use a high number of perimeters to increase the strength of the part.