1 / 4
RC Drift Magnetic Body Mount - for Yokomo YD2-Z RTR (Front and Rear)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple magnetic body mount for the Yokomo YD2 vehicles. I specifically made this for the YD2-Z RTR model.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 233
- Wydruki
- 0
- Wyświetlenia
- 1812
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (34)Powiązane
Simple magnetic body mount for the Yokomo YD2 vehicles. I specifically made this for the YD2-Z RTR model.
You will also need 12mmx3mm magnets, and some 1.5mmx15mm screws to attach it.
It is designed for the screw to go through the factory body mount (to allow for adjustability). The magnets press-fit into the bottom.
I printed with PLA, but I expected PETG will also be good for this use. Printed with 15% infill.