1 / 5
Cover Plates for RatRig Vcore-3
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover piece for bolt heads secured with M6 fasteners (used in RatRig V-core 3 builds).
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 152
- Wydruki
- 1
- Wyświetlenia
- 903
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (2)Kolekcje (72)Powiązane
I don’t like all the bolts showing on my Vcore3 build. It’s a bit too industrial and unfinished for me. The top surface is a robust 1.2mm thickness for durability. The covers include a magnet mount for 5mm x 3mm disc magnets (I had some laying around) as I was concerned about them becoming loose if removed/refitted.
In the end, I’ve not used the magnets because the stiff/tight interference (push) fit works really well for me, and the magnet mount is not included in the rest of the covers.
NOTES:
- E-stop cover plate is design to fit my E-stop mounting bracket and will not fit a standard corner plate.
- These parts are an intentionally tight fit so that they do not vibrate loose at high printing speeds. You will need a tool (flat screw driver head or similar) to remove them if printed correctly.