1 / 7

HEXAHEDRON

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

B&B TECH

@BBTECH

My take of a corexy 3D printer with cues taken from many other projects.

Ocena: 0 / 5
Polubienia: 15
Pobrania: 33
Wydruki: 0
Wyświetlenia: 908
Oceny: 0

Aktualizacja u źródła: 24 lis 2023

Informacje o modelu

Źródło: Printables
Kategoria: Other Printer Parts & Upgrades
Licencja: Creative Commons — Attribution — Noncommercial — Share Alike

Szczegóły Pliki (28)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (28)

https://github.com/damanbaird/HEXAHEDRON

My way of making a better 3D printer out of the worthless Tronxy X5SA that i had, or start anew for that matter. Hypercube evolution was out of the question since i didnt want to buy all new 3030 extrusion pieces. This build does loose a small amount on the XYZ axis but i think the improvements in the prints was worth it with my glass bed it prints 312x300x330, with some bed support modding it could be as much as 360x310x340. Running Klipper firmware. Has magnetic kinetic bed mounts to reduce bed warping while heating. pulleys run on smooth rods not screws! I have included My Amazon affiliate links for the parts i bought.

A few extra parts needed:

Designed for Orbiter 1.5, Sherpa mini or micro extruders.

E3D V6 hotend or clone

2 x 410 10mm smooth rods

2 x 480 8mm smooth rods:

2 x +/- 480mm 2020 extrusion

1 x 500mm 2020 extrusion

6 x 3.5mm x 30mm rods

3 x 10x20 magnets

6 x 20 tooth pulley w/ bearings: https://www.amazon.com/dp/B07JNQQKTC?th=1&linkCode=sl1&tag=bbtech0db-20&linkId=dee3bdfacb5fd327f5e1c2122d723ef6&language=en_US&ref_=as_li_ss_tl

2 x 16tooth smooth pulley w/bearings

2 x LM10UU extra long bearings: https://www.amazon.com/dp/B07JNQQKTC?th=1&linkCode=sl1&tag=bbtech0db-20&linkId=dee3bdfacb5fd327f5e1c2122d723ef6&language=en_US&ref_=as_li_ss_tl