APC UPS shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This shield protects your APC UPS from liquids, objects and other items that may fall on top of it from the workbench.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 710
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This shield protects your APC UPS from liquids, objects and other items that may fall on top of it from the workbench / table / etc.
This shield works with APC Back-UPS Pro 1200 / 1300 / 1500 that have USB charge ports at the front and are 3.94-3.98 inches or 100-101 mm (10cm) wide. ( It could also work with other units as long as they are about the same size wide. )
The shield features: 4 clips to attach to the sides of the UPS and bumper supports(should something heavier falls on top.) The shield offers lots of room for ventilation and doesn't obstruct the use of the UPS unit.
The shield is designed to protect the front 9.45 inches of the APC UPS unit. It also has a back lip to stop liquids from running to the back where the plugs are located.
Cheers!
Notes:
Print in any filament you want. However, PLA+/Pro/HTPLA is recommended.