1533 modeli
A Christmas Update | V4 is Here! 🎄 12/09/2024 This update marks the final version of my iPhone Standby Dock Remix, and I couldn’t be prouder to share it with you all. Creating this has been a monumental task—I went through and completely…
If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to make a simple and high quality CNC drawing machine to draw on almost anything. I'll step you through how to build your own…
Soporte para auriculares ajustable en altura No requiere ningún tornillo para su montaje, es todo impreso en 3D. Archivos 3mf incluidos, preparados en Prusaslicer y Bambustudio. La placa es personalizable. En los archivos encontrarás una…
Original version was to big for my phone. Additionally I'm using case with “ring” so it was to thick so I created two new versions for anyone with small phone, and phone with thick case. Xbox Series One Controller Phone Mount Narrow - for…
Recently I designed a very rugged Tablet Stand for a Tradeshow booth that used quite a bit of unique hardware. After posting the design on Reddit and getting feedback, I decided to try and duplicate the design without using any hardware…
Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…
Headphones hanger, you adjust size of it by bolt, sometimes thread is not fitting so you need to use sandpaper and maybe some grease. You can change dimensions in freecad.
Update: 2/8/2023 : Added a variant with an even stronger total load capacity by addressing the weakest bend in the first model, but you can't push it quite as far into a desk because of the curve. See “Variants” for which one to print.…
Use a toothpick to attach the top crystal Make sure to add proper supports for the bow tie or use the included 3mf file Differences from the remixed model: Better looking top sim crystal, actually symmetric Fixed geometry in some places…
Helps to amplify/redirect sound from phones with bottom-facing speakers. Edit: Updating dB stuff with new measurements and correct maths Increase is around 8-9dB for the intro to the song “Smokin'” by Boston played on my P20pro from…
The idea was to have a simple and clean looking stand, which can hold bigger phones (5.5 inches for the phone in the picture) or phones which are protected by a thick case. I also made sure to keep this thing easily printable, without any…
I brought a new phone a while ago and I wanted to print a Tripod to take pictures of the night sky. However, I didn´t quite find anything that I wanted, so I decided to design my own. This is my first project I upload so I don´t really…
With the screw you can adjust any desktop width up to 4 centimeters ! 3D PRINTING SETTINGS Nozzle : 0.4 (0.6 to increase print speed) Layer height : 0,28 mm min No supports needed Wall line count : 3 (it's important for the stand…
This is a Star Trek headphones stand. Great as a gift. Prints in two part and slots together, glue for stability. @3DPrintBunny
Not much to it. It clamps onto your desk or table up to 36mm thick. Took inspiration from multiple other designs. I like the “S” shaped hangars since I won't bump into it but I hadn't seen any that have a locking screw like others so…
This is a simple wall mount for a PS5 official controller and headphones. Just print everything out of PETG (I used Prusament PETG) and glue it together with superglue. To fix it on a wall, use Mamut Glue or similar one-component glue.…
The Desk Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a horizontal desk up to 22 mm thick . It features a simple and elegant design…
The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates, Blender source file, and more detailed instructions. Go to my site for an overview of my other models . Only a few of…
Once upon a time, I printed this: Cat Ears for Headphones by usernamexx - Thingiverse Today it broke :( So I designed my own to improve upon the design. What makes these better in my opinion is that it prints in a single part and is hence…
PS5 Controller and Headset Wall Mount (or Single Controller) This wall mount provides a versatile solution for organizing your gaming space, allowing you to conveniently store one PS5 controller and a pair of headphones (or a single…
Minecraft Headphone stand Prints in three parts and slots together Easy to print with no supports needed Follow me on instagram @3DPrintBunny
Just a simple headphones stand in shape of PacMan ghost with a storage compartment. Please click LIKE if you download or just liked the print.
Hi I remixed this middle part of the Tesla super charger (Great looking thing, great design) The part on the original one was meant for micro USB, but just upgraded my phone and it now has a USB type C instead. So needed to modify the…
These files and a head(amame) Parts Kit are all you need to start making your very own head(amame) headphones! We supply high end components found in Hi-Fi headphones costing over $1000 so that you can experience Hi-Fi without the high…
Spiderman headphones stand Prints in 3 parts and slots together without the need for glue. The spider slots into the base - you can have it flush with the base or sticking out to make it more prominent. I printed the top by changing…
моделька с отдельной головой и местом под пружинку от шариковой ручки
Designed by a Professional What makes this headphone Hi-Fi? SCIENCE! I spent quite a while finding the optimum combination of tuning materials and geometry to bring you the Satyr 3. This design beats out all of its competition in the…
Variable Openmod This is a fully open source headphones designed to be easy to assemble, easy to print out without any supports. It is also made to be highly modular, capable of using most 40-52mm drivers. The overall design itself is…
Star Wars Darth Vader headphones stand Print in two part and slot together The normal size stands about 210mm tall, you can use the Star Wars base tall to make it slightly taller without changing the other dimensions The extra large top…
This project combines concepts from both the marvelous Modular Mounting System by HeyVye (on Thingiverse), the innovative Tripod Phone Stand by DieZopfe, and my own designs. I used the GoPro compatibility of the arms from the system from…
An easy way to hang your headphones to an IKEA Skadis pegboard using two standard long hooks. It's designed with a gentle curve to better support and preserve the headphones head band. The print requires no support and it simply snaps in…
Print the two parts and join them together with a bite of glue or double sided tape. Layer Height: 0.3mm Infill: 20% for the hook part, 15% for the headset stand. Support: On build plate for Part A. None for the part B (See pictures) If…
This headphone stand draws directly from automotive performance aesthetics , transforming a functional object into a bold visual statement. The wheel-inspired form and exposed mechanical details evoke precision, speed, and engineered…
Hi, here is best replica of broken head band for Surface Headphones 2 to the date. I tried several of existing i found out on the brode web but non of them was 1:1. This model having same thicknesses and same diameter as original. I am…
Satyr 4 DONT WORRY! I've already done the hard part for you! I spent thousands of hours learning the science behind headphones to create this headphone design! As the 4th iteration of the Satyr Open Back Series I have spent the past few…
This is just a simple rescale of the original for use with tablets. I liked misterT's remix of jonnig's phone stand , especially the stronger front hinges, which tend to break easily in the original. But the "medium" version is too small…
Game of Thrones Headphone Stand with the Stark symbol in the centre. I have created two versions one with the word Stark down the centre and the other with GoT. Prints in two pieces and slots together. Use supports touching build plate…
Simple headphones wall mount with hidden screws. Print instructions I would recommend you to use some strong filament but even PLA is strong enough. Also to make holder more durable use 3D honeycomb infill on 30% or gyroid on 40%. The…
Please help support the creative work of each 3D artist and NEVER share or sell a digital file. https://www.patreon.com/smart3d 3D printing settings layer 0.2 , use m600 to change color in base *layer 0.2 *No Supports *10-15% infill *3…
Hatsune Miku Cosplay Headphones They are glue in place with color separated details that can be used for lighting and accents. Heat forming the headband may be needed to get them to fit comfortably. Inland Filament Used: Black PLA Pink…
A simple fuss free headphone stand that is easy to print and looks professional and elegant on a desk setup. This can be printed in vase mode with 0% infill or with 5-10% infill for heavier headphones. This design was initially made for…
🎧 DIY 3D-Printed Headphones – High-Performance Sound, Maker-Driven Design! 🔊🛠 It all started with an obsession— headphones . After 25+ years chasing the perfect pair , spending thousands on different models, I finally asked myself: why…
The controller holder is based on this design: https://www.printables.com/cs/model/37669-xbox-controller-stand If you want to add some stability, you can also print the triangle supports and glue them to the stand. Enjoy!
Do you want to use your old phone as a webcam? If so this print will help you to mount your phone on top of your monitor. I made this because i couldn't find a model to fit my monitor monitor (fits all my MSI monitors). This is also my…
This is my take on the well known and loved phone stand with hexagon pattern. I fixed some things about it i did not quite like that much, the changes i made are as follows: One continous patch of hexagon-pattern runnig round the whole…
A minimalist headphone stand with style adds sophistication to your workspace.. Keeps your headphones within reach while keeping your desk clutter-free. Prints with no Support
Mandalorian Headphones Stand Prints in two parts and slots together. Use supports touching buildplate for the top only @3DPrintBunny
3D-модель легендарного котенка из The Sims, ставшего героем вирусного мема. Тот самый котик в больших белых наушниках и с розовым бантиком, который едет в транспорте под стильный трек. Статичная фигура!!!
This very fast print can be mounted over any selfie camera (mainly designed for Tesla interior cameras). If you use it for laptops, ensure that it does not damage your display (as the Slider is not flush with the housing. Be sure to print…
The Mini Tripod for DSLR and Digital cameras offers a full 360 degree rotation plus 180 degrees of tilt and is exactly what I was looking for specifically for 3D scanning. It also locks down well, once you add the noted washer to the deck…
Clip-On Cat ears for your headphones (or other appliances) The clips are attached to the size-adjustment band of the headphones and ears are press-fitted onto them. This makes it easy to switch to ears in different colors. (or to detach…
The Bookshelf Mountable Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a bookshelfs vertical stands ranging from 18 mm thick up to…
My Original Project https://makerworld.com/it/models/655968#profileId-582989 This simple tool allows you to remove dust and dirt from USB ports and clean the inner part of the rubber, which often gets dirty. 1 gram and 8 minutes of printing
Just a side kick of my normal designs… may be someone has use of it. 😊 If you need a girl with phone in sitting pose - there is already one here (called "WrongTimeGirl"): https://www.printables.com/de/model/316751-passengers-for-steam-bus…
Ouroboros is a closed back headphone designed and intended for people who value high quality audio. With a dark-tilted tuning and a decent bass shelf these cans sound both fun and high fidelity. The ring-radiator driver (similar to the…
Use screws to mount this to a stud in your garage or shed. Get your tools off of the ground and out of the way! This is a slimmer version of Dallan's Versatile Wall Mount. It prints faster, and is less heavy-duty. It should still hold all…
Very simple headphones holder. Should work for many types of headphones. Basic parameters: Dimensions: 70x28,2x44mm Holes: 2xØ3,5 mm Supports: not required
Does work, mobile speaker needs to point downwards into the slot. Scale/modify model to fit your phone, as is, it fits a Google Pixel 9, Pixel 6a & Asus Zenfone 3, slot is 77x10mm. Added supports at the back for better stability. You…
Ironman headphone stand. Slots together Use supports touching build plate for the top. This print uses a filament change mid- print. If you would like help with this let me know? I have also included the top as two separate prints that…
Headphones stand, code name "Mighty Duck", with optional parts depending on the use case and/or aesthetic preference, designed to be printed with color (filament) change for that added flare. STEP files are included for convenience. STL…
Size cca 85x60x55mm. Design versions A, B, C, D. Versions for max. Phone depth 9, 11, 14, 17, 22, 27mm. Tested. Second version:
Simple hook for Pulse 3d charger For PS5
Headphones wall hanger. Because we don't like headphones sitting randomly on a table. They just look bad, right? :) This helps tidy your room or workspace and should work for a wide variety of headphone models. This design does not have…
I really enjoyed Sneaks' wonderfully designed Adjustable Stand and how well it works for tablets. Wanting a smaller version that fits for my phone, I scaled down the parts, removed material from the bases, and slightly modified the hooks.…
This is my horizontal "widescreen" HoloBox for Smartphones, based on Pepper's ghost illusion technique. Superb for advertising stuff! Very easy build! Print out the two halves snap them together (they have snap-joints). Slide in the…
Simple transport case for JBL Tune 500BT headphones. For hinge pin I used a piece of filament. Material: PLA Nosupport Layer high: 0,3 or lower
This is a simple headphone hook that clamps to your desk and is reversible allowing you to either hang your headphones at the front edge of your desk (using one of the "HP OuterHook*" styles), or back, underneath (using "HP InnerHook").…
The stand allows you to put the phone on a desk or elsewhere, in portrait or landscape orientation, with adjustable tilt. Could be used as a tripod when the phone is vertical. Fits large phones (see the Pixel 6 Pro on the photo) with a…
I'm sure you are all familiar with this design by now, it's a remix of an existing model with an enlarged holder to accommodate for thicker phones, even with cases. Includes a cutout to allow a phone to be held whilst charging, making it…
I added a USB Type C Connector to the original model. The modified part can also be found on Tinkercad. It is a bit rough, but feel free to modify it. https://www.tinkercad.com/things/ayL2E4p9md1-tesla-supercharger-usb-c-holder P.S.:…
Mandalorian Helmet Headphones Stand Prints in two parts and slots together. Use supports touching buildplate for the base. @3DPrintBunny I switched filaments mid-print. If you would like help with this let me know. I have also split the…
Star Wars earphones holder Darth Vader, C3PO and Stormtrooper Easy to print, no supports @3DPrintBunny
This is a fully open source headphones designed to be easy to assemble, easy to print out without any supports. It is also made to be highly modular, capable of using most 40-70mm drivers. The overall design itself is also made to be easy…
Easy to print cat ears for your headphones. You can use zip ties, rubber bands, velcro or string to attach the ears to the headphones. I attached a small white pom pom on the inside to give it some fluff. Headphones on the images are…
This is my original design for Miniature Over-Ear Headphones , specifically scaled to be the perfect accessory for collectible figures like Labubu, Pop Mart, and other 1/12-scale art toys . The unique print-in-place construction means no…
PRINT OFF ONE OF THE THE FIRST UPGRADES FOR DUMMY 13. HELP SUPPORT MY PRINTABLES ACCOUNT BY LIKING IT AND DOWNLOADING IT. PUT IN THE COMENT IF YOU WANT MORE DUMMY 13 UPGRADES
Minimalist Headphone Stand – Modern Jellyfish-Style Design An elegant and functional headphone stand with a modern, flowing form inspired by organic shapes. The slim, arc-shaped design provides stable headband support while presenting a…
Clip-on ears for headphones! If your headphones have a different-shaped band you may want to adapt the clip design They print in three layers and are held together by the clips - I had to do a little filing to make the clip fit snugly…
You can download two versions. 25mm is for ordinary head phones 50mm is for hearing protection. Easy to print. 20% infill. 0.2 layer height I recommend setting your "vertical shell" to 5. Print Settings Printer Brand: Prusa Printer: I3…
There are some usb-c dust protectors on printables but they were too bulky or too shaky for me. That's why I designed my own protection for my smartphone with a Pitaka protective cover. if you need any adoption or change let me know :-)…
The Satyr 2 presents a sound profile that is a delicate balance of clarity and warmth. It leans toward a mid-forward and neutral signature, allowing vocals and instruments to truly shine and take center stage. There's a subtle but…
Headphones holder : You can print the holder with an infill of 20% but you have to setup an infill of approx. 50% for the edge next to the screw pitch (see GCODE file if it's not clear) to increase the strength of the print. Thereby you…
Headphones holder with an adjustable screw to fit desk's thickness from 5 to 35mm.
Moai headphones stand in three pieces. No Support needed. I liked the idea of this ( https://www.thingiverse.com/thing:1736242 ) but I wanted my headphones stand to more look like the original statues with this stone on their head (…
Headset stand with pocket for cable or anything else. Edited from original: Headphone Stand - Easy Printby JYC_RS 0.1-0.3 Resolution (0.2 Good compromise, 0.16 looks excellent) Supports required on pocket if set on back. Infill > 10% (15%…
This is a dashboard mount for Fanatec's CSL DD wheel base along with a Google Pixel 6a. Feel free to tinker with the provided .ipt file (Autodesk Inventor or Fusion 360) or even send me your smartphone model and I'll gladly modify the…
These devil horns are made to be attached to a headset or headphones. The .stl file is one single horn. The .3mf file is for Bambu Studio and already includes two horns on the build plate. Print Settings: I printed the horns with 0,12 mm…
Update: Improved volume and fit, as well as a version for the left hand. (Example printed in white PLA+ from eSUN). Background: Created for my partner who has quite big palms - he said when playing for longer it is straining to hold the…
Organize your headphones, controller and charging cables with this unique stand featuring a built-in drawer for a clutter-free experience. Make sure to check out my matching stand for PS5 games:…
I tried to find earbud case, but finally designed my own. Print without supports. Please share you makes and consider donation. https://paypal.me/novatormaker https://revolut.me/onovator
You will need a screw where the thread is M3 and 8mm long and an M3 nuts. You will need to push the wires through the gap in the print and the make sure the thicker part (bottom) is clamping onto the bearing and the slimmer part is…
A charging mount for the Shokz Opencomm/Opencomm2 headphones. The original charging cable fits securely in the mount and gives a flat surface to mount using double-sided tape or 3M Command Strip. Allows the charger to be hidden behind a…
I've prepared this model for a gift. It's a remix from two models to hold a ps5 controller and headphones, and at the same time, this model can be hung from the PS5 itself. The finish is not very good as both models were bevelled but it…
for shelves thick up to 35mm, dont be surprised, i used the same image, so that i dont have to print it again
A small hook to hang headphones by my bed.
This is a two-part hook for hanging your headphones under the table. Hook part need to be printed on it's side, brace part with the cutout facing up. The screw holes are designed for 3.5 mm flat-head wood screws.
This headphone hanger it's designed for ikea lack shelf, but will fit probably any 50mm thing. There is a screw hole in the bottom for securing, but it's optional as it should be tight fit. Print instructions print as oriented in stl
Kitten cat Plumbob headphones sims meme on train
FR: Il peux porter des tailles de anse jusqu'à 45mm EN: It can carry bight sizes up to 45mm
![Desk Headphones Hook [Easy to Print] [Multiple Variants] / Clamp / Holder / Hanger](https://media.printables.com/media/prints/664262/images/5232779_79e6456f-825b-420c-b549-25ccaeddc536_e9b42033-6509-4546-87ec-a2d2b3b002b1/dsc_3556.jpg)
![Vertical Headphones Hanger / Clamp [Kallax] [Easy to Print] [Multiple Variants] / Holder / Hook](https://media.printables.com/media/prints/663848/images/9073575_3e0a47ae-93d3-4674-baa9-523682eaa44c_2ecbe634-d193-4580-af2c-590abfc9a03b/headphone-clamp-v23-32-ext.png)
