Prusa Mk3S+ R6 RHD print fan shroud and extruder cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have not found a suitable modification to the excellent print fan shroud created by…
- Ocena
- 3 / 5
- Polubienia
- 24
- Pobrania
- 253
- Wydruki
- 1
- Wyświetlenia
- 1788
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have not found a suitable modification to the excellent print fan shroud created by RH_Dreambox: https://www.thingiverse.com/thing:4376765
to suit the Mk3S+ (the latest Prusa extruder design marked R6).
There is one solution prepared by goldbird3: https://www.printables.com/pl/model/199028-prusa-mk3s-rhd-fan-shroud-duct-revc
but it uses the original fan mounting point on the Prusa extruder cover, which forced to add a connector for fan mounted with new shroud. This looks bad in my opinion.
So I checked other solutions and finally decided to remix the original R6 version of the Prusa extruder cover: https://www.printables.com/pl/model/57217-i3-mk3s-printable-parts
to use the fan bracket developed by wavexx: https://www.thingiverse.com/thing:4172720 https://www.printables.com/pl/model/144797-mk3s-nozzle-rhd-rev-c-remixed
and the fan shroud from goldbird3 (which he modified based on the C version: https://www.thingiverse.com/thing:4376765
rather than the CS version: https://www.thingiverse.com/thing:4124587
in my experience the C version has better internal geometry).
This approach was necessary in order not to change the shroud geometry designed by RH_Dreambox and to be able to use the Mk3S+ upgrade without additional fan mounting parts, proposed by wavexx.
Print Settings
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0,15
Infill: 100%
Filament: Plast-Spaw ASA, ABS, PC Black
Notes: Use some brim to ensure that the printed parts will not bend.