Liczymy pasujące modele…
A remix of the fantastic RH_Dreambox fan shroud for MK3 to fit the prusa mini. Files fitting both original Mini and Rev 2 included. https://www.thingiverse.com/thing:3249344 Print instructions EDIT 2021-02-16 The shroud has been lowered 3…
New version of Bondtech BMG Prusa Upgrade MK3S/MK2.5S with RHD ver.C fan shroud. I modified the original version model to be easy printable with FDM printers. The original source:…
This thing is originally designed by RH_Dreambox on Thingiverse . Thank you to him for putting in the hard work to make this print great. Posted here with conspicuous credit. This fan shroud was designed with Autodesk CFD to create better…
This thing is originally designed by RH_Dreambox on Thingiverse . Thank you to him for putting in the hard work to make this print great. Posted here with conspicuous credit. This fan shroud was designed with Autodesk CFD to create better…
Inspired by https://www.prusaprinters.org/prints/34475-prusa-mini-rhd-fan-duct-rev-c Olof design was inspiring but the design itself has some internal flow restrictions (look like topology import errors) and was mounted way to high so I…
@update Added version 8 - slimmer and even lower. The original model from Olof Ogland was nice but the exits from the fan were way too high - it was directly blowing at heater block ,not the print. What I did was making hole for the screw…
The original fan shroud was not created be me. Link to original upload https://www.thingiverse.com/rh_dreambox/designs https://www.thingiverse.com/thing:3249344 CAD model is done in OnShape and can be viewed here…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** This is a remix of https://www.thingiverse.com/thing:4124587 . Thanks for the…
I have not found a suitable modification to the excellent print fan shroud created by RH_Dreambox: https://www.thingiverse.com/thing:4376765 to suit the Mk3S+ (the latest Prusa extruder design marked R6). There is one solution prepared by…
There are many 240sx/LHD cup holders out there, but none for a JDM/RHD Silvia or 180SX. Fit all cans and cup styles 2024
Jaguar XF X250 right hand drive (UK, Cyprus, Aus, Japan etc) phone holder for a BV9900 phone. None of the designs i could find allow the odd shaped "cubby" to be closed when not in use, this design does, I've spruced it up a bit with a…
I noticed that the original holder pinched on the hotend cables an uncomfortable amount, thus I modified it to give them much more space and cleaned up some weird geometry. The duct design is unchanged. Mounting still requires an M3x8…
Remixed to fit a 5020 blower Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Unbranded ABS Yellow Notes: Print it at least on ABS, best on Polycarbonate Category: 3D…
I don’t like the oblique fan position because it cause vibrations on the radial fan and can shorten its life. I create this mix with the RHD rev C. fan shroud (one of the best) to keep the fan horizontal. TIP: when install the fan please…
I made this drawer to keep small things like keys, parking change etc in my Audi glovebox. My car is an Audi A6 C7 2012 UK model. There is a small recess underneath to make a small handle to pull it forward. It took many iterations and a…
Panel for 1 din player and separated A/C control (mean original sound and climate control has 2 different board)
i was fed up of the handles to the glove compartment always breaking on me and i was forever trying to find a replacement on the net .. so i modelled my own which is a lot stronger that the stock part (which costs around 20GBP ) Print…
I just added a small part that locks the fan shroud against rotating and sinking on the right side. Please refer to https://www.thingiverse.com/thing:4217188 by RH_Dreambox for information about the original file. Category: 3D Printer…
If you’ve ever been captivated by the immersive glow of Ambilight , you know just how much it can elevate your TV-watching experience. Ambilight isn’t just a feature; it’s an ambiance creator that extends the colors on your screen to the…
I augmented Mitynerp's original model to have the cupholder a few centimeters towards the left which was more comfortable for me. The model with the cup toward the right is just a mirror image of my LH design. Recommend printing with…
Be sure to download the version you need, whether that's LHD or RHD
Full 3D printed replacement for the factory lever assembly NOT MY DESIGN Mirrored from original design to fit RHD cars Original LHD model: https://www.thingiverse.com/thing:4611616 Assembly is pretty self explanatory once the carpet has…
SwanColorHD Case I am just trying out TinkerCAD and very novice at it, this is my first time designing something. This is as far as I could take my idea and it worked enough for me and I can't really spend more time. I implore someone…
WIP: I try to finish and add the lid in the coming days. I designed a box to house a power-supply, Raspberry Pi4 and a micro-controller board for Hyperion/HyperHDR. I used this guide (see below) to build my HyperHDR setup and needed a…
Uses self threading holes and is best to print in ASA with supports. I find the newest version of Superslicer (2.4 beta) allows a brim to be attached to the draft shield greatly improving success rates on open air printers. Tight…
This is my remix of: https://www.printables.com/cs/model/136666-prusa-mini-heatbreak-fan-noise-reducer made to work with: https://www.printables.com/cs/model/52553-prusa-mini-rhd-front-fan-duct
This is a tweaked version of the excellent MK3 Nozzle RHD Rev. C by RH_Dreambox fitted for the stock MK3S extruder and optimized for FDM slicing with PrusaSlicer/Slic3r. Besides offering superior part cooling (esp. for low airflow), it…
Print on the flat back, add supports in the slot for the phone. 0.2 Layer height, 3 wall loops. 15% infill. I warmed up the "neck" and twisted it towards the steering wheel for clearer view of the phone screen. Glue/Double sided needed to…
Flipped and scaled down slightly for a better fit
This is a Land Rover Defender Seat Box Floor Vent, which allows air intake from below the vehicle, for a Seat Box fitted Diesel Night Heater. , There is a rubber grommet that you can remove and replace with this vent pipe, I used marine…
This little modification is needed for aspirator hose connect to your heater box to proper work of interior temp sensor. This is the scond version. I am designed only the bottom part of adapter. So you need the JDM part and cut down like…
This mount works for PrinterMods MDD, BMG-M and Mosquito Hotend, with a RHD Fan Duct by RH_Dreambox. The duct is the "RHD Fan duct for MK3 Bondtech BMG Mosquito" https://www.thingiverse.com/thing:4217188 Print instructions I designed this…
Cover for fitting an E60M5 SMG shifter in a right hand drive BMW 8-Series E31. Printed in PETG at 50% infill.
I was wondering how to improve the part cooling with the Micro Swiss NG. Since I modded my Ender 5 Pro to a Hybrid Core XY (thanks to the Endorphin3D Project ) with linear rails, it would allow me to mount the part cooling fan behind the…
I retrofitted a glovebox cooler to my Audi. The glovebox outlet and pipe were easy to obtain, but there wasn't any way to connect the pipe to the air con box, so I made one. This flange slots onto the end of the pipe, then you will need…
This is a tweaked version of the excellent MK3 Nozzle RHD Rev. C by RH_Dreambox optimized for FDM slicing with PrusaSlicer/Slic3r. If you're using another slicer, and/or are able to print the shroud with another high-resolution technique…
This is the STL data of the shell created for the swancolorHD PCB. This variation has a hole on the right side for connecting expansion devices such as the WonderSwan's communication cable. In the image, it looks like there is a slit in…
A Fan Holder, mating the excellent MK3 RHD Fan Duct Rev. C by RH_Dreambox to the Original Prusa MK2.4 Extruder design by MattsHub. got the dimensions almost right, the bottom 'pillar' needs about 3 0.5 mm washers. might fix this in the…
Designed this because 1983mor's version does not exactly match the BMG mount. Category: 3D Printer Parts
This is the STL data of the shell created for the swancolorHD PCB. M2(OD3.5) insert nuts are required to make the shell. The square hole on the back is for attaching a 6mm square tact switch . By connecting it to the power switch line…
Learn Guide: https://learn.adafruit.com/ambient-video-lighting-with-hyperhdr
Credit to CS900 who did the original for the LHD I just uploaded this as a mirrored version that I have yet to test.
Somewhat untested, previous model tested and was slightly off. This model should have no problems with the buttons.
I created this as a little shelf to go where the wireless charger sits in a 2026 (facelift) Cupra Formentor (RHD). The design is done from measurements of the charging pad, and guesstimated angles, so it may need tweaking, editing,…
I needed a small button box to navigate menus in VR with my thumb. 4x m2 20mm 2x m2 40mm 2x m3 20mm 1x m3 10mm 2x m6 35mm + nuts It's a good idea to buy cheap bulk m2 / m3 40mm from Ali and cut to size. You will have the rest for future…
Flipped and scaled down slightly for a better fit
This is the STL data of the shell created for the swancolorHD PCB. This variation has a hole on the right side for connecting expansion devices such as the WonderSwan's communication cable. In the image, it looks like there is a slit in…
I augmented Mitynerp's original model to have the cupholder a few centimeters towards the left which was more comfortable for me. The model with the cup toward the right is just a mirror image of my LH design. Recommend printing with…
Cover for fitting an E60M5 SMG shifter in a right hand drive BMW 8-Series E31. Printed in PETG at 50% infill.
Several updated and more complete versions of this design are now available here . About Recently switched to the ZOrbiter V2.0, but wanted to keep my RHD (rev. c) fan duct . I remixed the RHD duct to slide into place like the ZOrbiter…
Remixed throttle pedal extension for NA and NB Miata/MX5s. This builds on the captive M4 nut remix and adds a cutout for side mounted pedals. I found that my pedals on my NA MX5 (New Zealand Domestic Market - RHD) were either replaced…
A remix of the RHD CS NOZZLE for the pitstop extruder. Angle and attachment of radial fan was altered. A spacer was created to adapt from original mounting holes. Printability was improved (I think) by an addition of a fin inside the…
Had some problems with the original duct sagging after a while due to creep of material during high temp prints, especialy the side blowers. So I redesigned the duct removing them in favor of more air flow in center. Printed in ABS.…
![#0006 [Remix] MK3S+ RHD Nozzle Fan Shroud](https://media.printables.com/media/prints/145116/images/1371542_26bf8b88-7f8f-4fb9-901f-18c71929ea6a/large_display_rl_20210426_12_145116.jpg)
![MK3S RHD Fan Duct Rev. C simplyfied [Remix]](https://media.printables.com/media/prints/550182/images/4431400_1f1bc19b-5709-4118-86c1-6e1a8696ab3d/20230813_160432_1.jpg)
