Bambu Lab Style Nozzle Wiper 2020 Ender edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I saw a post by Metapher and wanted to adapt it for the ender
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 1302
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
i liked the idea of the bambulab nozzlewipe for 2020 extrusions.
this print is a remix by Metapher. for more info on the macro and stuff check the original part.
this one is just a bit taller and uses a piece of PTFE (14.5mm) as wiper tube. the PTFE is held my a piece of filament. the filament should sit very snug in the holes. you can test the clearance on your printer with the test piece. if the filament sits loose you canmelt down the ends with a lighter or solder iron. i didnt test any fit but it should fit just fine on the left bottom extrusion.
BEFORE PRINTING!!! check the fit. the bottom extrusion of you printer and the top of your bed should be about 60mm +-1mm. If not, Change the size yourself with the provided f3d file, you need to change the length of the first scetch (circled in red in 4th pic).
Bom:
- M3x12
- M3 t nut
- PTFE di=2mm
- some filament
Happy printing!