Magnetic Bracket for Digitech (Rudder) Angle & Throw Meter - now includes anti skid plates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fix your Digitech Throwmeter to the rudder without a hassle and move it quickly to the next! Including anti skid plates!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Everytime I was setting up the throw of a new RC plane I was struggling how to fix the throwmeter. I often used double sided tape, but that was not the solution.
Why not make a simple magnetic bracket? This it is - my simple solution to fix the Digitech Angle & Throwmeter to almost any rudder size, -thickness or -angle. Just put it on the rudder and you are ready to go. Setup finished - move it simply to the next rudder.
You need 6 pieces of 10x3mm magnets for each throwmeter - 12pieces all together.
Glue the box to the bracket. The file “Digitech Throw Meter AntiSkidPlate.stl” should be printed from TPU or similiar soft material to make it “stick” to the rudder surface. Print 2 pieces and glue to the underside of the bracket and on the slider respectively. Everything else is a press fit!