Neewer LED Panel Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket for the Neewer LED panel light which allows the lamp to be tilted further down.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 571
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
This is a bracket for the Neewer LED panel light which allows the lamp to be tilted further down. Due to the diffuser or the foldable shutters, a downward tilt is not possible. This angle piece enables that.
You need for mounting 2 M5x20 screws and 2 nuts, even better nyloc nuts.
I recommend to print the bracket from a sturdy filament like PC to get a high stability. The model should be printed with at least 5 perimeters and 30% infill.
I do not recommend PLA, because it is not resistant to permanent pressure.
If you like this project, check out my other designs too!