Neewer LED Panel Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a bracket for the Neewer LED panel light which allows the lamp to be tilted further down.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 37
- Makes
- 1
- Views
- 571
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
This is a bracket for the Neewer LED panel light which allows the lamp to be tilted further down. Due to the diffuser or the foldable shutters, a downward tilt is not possible. This angle piece enables that.
You need for mounting 2 M5x20 screws and 2 nuts, even better nyloc nuts.
I recommend to print the bracket from a sturdy filament like PC to get a high stability. The model should be printed with at least 5 perimeters and 30% infill.
I do not recommend PLA, because it is not resistant to permanent pressure.
If you like this project, check out my other designs too!