1 / 11
Radiator Extension + Hook — zdjęcie 1
1 / 11

Radiator Extension + Hook

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An extension and a hook for the radiators to hang clothes for drying

Ocena
0 / 5
Polubienia
1
Pobrania
11
Wydruki
1
Wyświetlenia
162
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a radiator extension to let increase the upper support surface on some types of radiators (those in my house) to let dry clothes in a stable way on the radiator top and let them flow in front of the radiator without falling.

And with the Snap-in Hook, you can hang them on the front of the radiators.

Attention..!!

Print them with PETG or other materials with a higher “Glass Transition Temperature” (The temperature at which the material begins to soften).
for PETG is around 80/85°C
for ABS is around 100/105°C
The usual temperature of my radiators, measured with an infrared thermometer, typically reaches around 60°C, then I used Prusament PETG

No Support Needed

Tagi