Mini Track Loader RC Micro Servo SG90 HXT900
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this based on the "Mini Track Loader RC" from Zedpi. You can use the lego chain and all the other parts…
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 1138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this based on the "Mini Track Loader RC" from Zedpi.
You can use the lego chain and all the other parts from Zedpi's design (https://www.thingiverse.com/thing:1000713). So it is only slightly larger as the original one from Zedpi.
The idea is from Zedpi, I only redesigned it that standard micro servos fit into it.
I use very cheap ones from ebay "TOWER PRO™ - Micro Servo 9g - SG90", but I recommend Hextronik HXT900 Micro Servos they are a little bit better in my opinion.
You have to modify it that the servos for the chain will be continuous (please search on youtube how to do that, there are a lot of videos).
Print Settings
Printer:
Cetus3D
Rafts:
No
Supports:
Yes
Resolution:
0.2 mm
Infill:
20 %
Notes:
You have to move the parts in your slicer or 3D-Printer software that it will be flat on the build surface.
Category: R/C Vehicles