1 / 1
Festool TS55 Track Saw Arbor Port Dust Cover — zdjęcie 1

Festool TS55 Track Saw Arbor Port Dust Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a lock in place dust cover for the TS55REBQ Saw. It should be fine in any TS55 variant.

Ocena
4 / 5
Polubienia
32
Pobrania
477
Wydruki
2
Wyświetlenia
1734
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a print in place model designed to print face up at 0.2mm, 15% infil using the designated supports. I've used PLA and ASA and both worked great.

I designed this based on designs I tried from here that either fell out, rubbed on the blade or didn't fit my model of the TS55 (REBQ). Some good ideas but needed refining.

This is designed to lock using the saws own allen key and the thin strap over the locking wheel is to overcome the loose aspects required by print in place tolerances. 

Please, if you have another variant of the TS55 and this fits, let me know so I can update the page for other people to make use of it… or maybe I can make one for the other saws if I can have access to one.

Tagi