Sovol SV06 5015 cooling bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cooling bracket with support for a 5015 fan. To be mounted on a sv06 with only 2 bolts
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 107
- Wydruki
- 1
- Wyświetlenia
- 1367
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After having a bit of clearance issues with other cooling brackets, i designed my own. This bracket sits a few mm's higher so there's no interference with the print. On the bottom it is complete flat, so there's not too many weird supports needed. The internal volume is also structured so no need for internal supports to be printed. The only supports required are for the tiny air holes and the 4 plugs on the backside.
The model fits in place by hooking it to the backside of the hot end rig and then bolting it into place with 2 bots, in threads used by the original cooling fan. So, a very easy installation!