52 to 70mm PCD simracing wheel adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As snapoffs are epensive I designed this adapter and extension for my Fanatec BMW GT2 wheel to be mounted on my VRS…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 130
- Wydruki
- 1
- Wyświetlenia
- 1833
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
2024-08-19 Update
-----
As snapoffs are epensive I designed this adapter and extension for my Fanatec BMW GT2 wheel to be mounted on my VRS DirectForce Pro wheelbase.
52mm (Fanatec) PCD to 70mm PCD adapter
Extension lenghts 30 and 100mm.
I can provide custom lenghts of this adapter if needed, let me know in the comments.
Print instructions
Print with high infill and high temp for good layer adhesion and strenght. My first print in 0.3mm @ 200C PLA and 20% rectilinear infill failed after 10-15h of use (100mm extension).
My next print was made in 0.15mm layers @ 215C PLA with 35% gyroid infill with some solid (100% infill) cylinders placed inside the print (with Prusaslicer/Superslicer) for added strenght. And this is still working for me.
12xM6 screws and nylock nuts are required for this.