Wall mount for Mainstays 28" Tower Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A floor space-saving modification to Walmart's Mainstays 28" Tower Fan mounts the fan to a wall.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This was created to save floor space in a smaller room with a fair amount of unused wall space. No modifications to the original fan or its mounting are needed. Mount the bracket to the wall. Ensure that the bracket is level. The holes were designed for #12 x 1 ¼" Taper Head Screws. When the bracket is installed, remove the base by undoing the star nut and attaching it to the bracket.
Printed settings used:
- Geeetech True White PLA
- 0.2mm layer height
- 20% Adaptive Cubic Infill
- 3 Walls
- Supports are needed inside the bore, but any removal scarring will be hidden inside or by the fan itself. A decently tuned printer and slicer should make removal easy.
Fun tip: Use a Smart Outlet to make the fan turn on and off with a smart hub such as Google Nest, Amazon Echo, etc.