Strong cable clip for IKEA Kallax, Besta, and others
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extra strong grip, straight from the printer. Fits Kallax, Besta, or can be customized to any other shelf/desk.
- Ocena
- 4,963 / 5
- Polubienia
- 893
- Pobrania
- 2005
- Wydruki
- 26
- Wyświetlenia
- 8880
- Oceny
- 27
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- GNU Lesser General Public License
I tried similar models from printables.com, but they all had bad tolerances or weak grip strength, so I designed my own.
In the second photo, I stacked 200g worth of stuff on the clip and it didn't move. Without needing tape for extra friction.
Models
STL files come pre-generated for two cable diameters (5mm and 11mm). There are variants for the following shelves (shelf thickness in parentheses):
- IKEA Kallax inner shelves (16.2mm)
- IKEA Kallax outer walls (37.2mm)
- IKEA Besta shelves and outer walls (18.35mm)
- IKEA Besta top shelf (30.7mm)
- IKEA Besta center wall (37.7mm)
- IKEA Ivar shelves (18.0mm)
- IKEA Ivar side unit, front-mounted (44.2mm)
- IKEA Ivar side unit, side-mounted (32.0mm)
- IKEA Lack desk and legs (50.25mm)
- generic shelves (18.35mm)
- this size fits IKEA Metod shelves and some of my non-IKEA branded shelves, so chances are that it will fit for many others too
Shown in the third photo: Kallax inner for 5mm cable diameter, Kallax inner for 11mm cable diameter, and Kallax outer for 11mm diameter.
Print Settings
- printer: Prusa Mini+
- filament: the photos show Prusament PLA Orange
- PLA or PETG print will lose clamping strength over time. TPU is probably a better choice for this model.
- print settings: 0.2mm, no supports
Customization
Custom shelf thicknesses, larger cable diameters, and more can be configured via the OpenSCAD source files, located at: https://github.com/mbugert/openscad-projects/tree/main/shelf_cable_clip