Prusa XL series: Flat LCD mount to enable enclosure doors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Im planning to enclose my XL in the long run, and the LCD was in the way for a door on the aluminum extrusion.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 124
- Wydruki
- 3
- Wyświetlenia
- 1573
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Im planning to enclose my XL in the long run, and the LCD was in the way for a door on the aluminum extrusion.
Base on the enclosure are the Sidecovers that you can find here:
https://www.printables.com/model/440363-prusa-xl-series-sidecovers-4-designs
This Display mount will enable to use doors that are flush to the 3030 aluminum extrusion, You DONT need to change cabling,
you can use the originals screws, and also the know can stay original.
I also added a cable cover for design purposes, but this is not needed.
After many asked me how they could support me, you can now
Tip me on KO-FI by klicking here:
https://ko-fi.com/surfalex2000
Check out my other optimized XL Parts! There is a Series to come!
You can find them in my Collection:
https://www.printables.com/@Surfalex2000/collections/830114