SKÅDIS door for IKEA Hinges
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mounting plate will allow you to mount SKÅDIS pegboard on IKEA hinges.
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 124
- Wydruki
- 4
- Wyświetlenia
- 2300
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This model allows you to mount SKÅDIS board on IKEA hinges and use it as a door for your BESTÅ or BILLY cabinet
.
For my print I used 50% infill (Gyroid pattern).
I use these doors to hide my electronic gear. It is perfect, as it still lets some air through and you can still see some of the lights in the cabinet (for example something is flashing red…).
And of course you can mount some stuff on the Skådis pegboard…
Parts used:
| SKÅDIS pegboard 56x56cm | 003.208.03 | |
| IKEA hinges: e.g: - Komplement hinge set (for BESTÅ) - HJÄLPA hinge (for BILLY) | 802.612.58 903.828.82 | |
| 4x SKÅDIS mounting screws |  | 153311 |
| 4x SKÅDIS spacer/nut (or M3 nut & washer) |  | 152741 |
The SKÅDIS board already contains 4 mounting screws, but only 2 plastic spacer. You might get additional ones at the IKEA spare parts website or get a M3 washer/nut from a hardware store.
UPDATE 07.11.20
Realised this model might fit for other IKEA cabinets as well and changed the text accordingly.
I could successfully mount it to the HJÄLPA and KOMPLEMENT hinge. Other hinges are untested.