Magnetic Neopixel Soldering Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small soldering guide for Adafruit's Neopixel buttons. It also has space for some embedded magnets.
- Ocena
- 5 / 5
- Polubienia
- 121
- Pobrania
- 754
- Wydruki
- 6
- Wyświetlenia
- 2203
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a small soldering guide for Adafruit's Neopixel buttons. It also has space for some embedded magnets which helps hold the jig in place if you have a set of helping hands with a heavy metal base. The magnets I used were 10x2mm magnets, but the actual height of the magnets was 1.6mm so I've included two versions in case your magnet supplier is more truthful than mine. Just add a pause into your gcode at the last layer before it starts bridging over top the magnet holes.
I'm including the Blender file I used to make the .stl files in case anyone needs to make a remix.