1 / 3
Bambu Lab P1S / X1 poop cover magnetic / noise reduction
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
cover to close the poop chute, 6x3 Magnets
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 83
- Wydruki
- 1
- Wyświetlenia
- 3741
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (27)Powiązane
I designed a cover for the poop outlet for when you print without the AMS, or just with one filament and want to keep the fumes and the heat inside.
I noticed its also a substantial bit less noisy with the cover on!
The holes are for 6x3mm magnets, comment or message me if you need another hole diameter.
It is printed in around 30 min with 0.2mm layer hight. Magnets should fit tight without glue. Enjoy!
