Tool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a simple toolholder. Designed for my ender 3 but it should fit every 2020 v-slot extrusion. It has 5 slots for…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Just a simple toolholder. Designed for my ender 3 but it should fit every 2020 v-slot extrusion.
It has 5 slots for nozzles and an extra slot for a heater block wrench.
The sockets are extra thick so the tools shouldn't rattle during printing.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.25
Infill:
50
Filament: Creality PLA BLUE
Notes:
Supports are a must! Printed mine with a 218°C nozzle and 60°C bed, 0.5 mm nozzle.
Sliced it with Cura.I highly recommend using a brim as the heater block wrench holder section is very likely to warp up otherwise.
Category: 3D Printer Accessories