1 / 2
Bambu X1C Exhaust Adapter for 63mm (2.5in) hose — zdjęcie 1
1 / 2

Bambu X1C Exhaust Adapter for 63mm (2.5in) hose

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed @Wolfie3D_373632's model to accomidate a 63mm (2.5in) hose.

Ocena
5 / 5
Polubienia
19
Pobrania
70
Wydruki
1
Wyświetlenia
486
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Took @Wolfie3D_373632's fusion360 file and made changes to accomidate a 63mm (2.5in) hose. This is a straight 63mm no taper, with a 4mm wall thickness for added strength.
Thankfully he included sketches so this novice F360 user could manage the changes.

I used 3mm foam tape to seal the edges against the back panel, three M3x10mm screws and one M3X12mm. With a little force you can cut threads into the unused holes on the back panel which is what I did, just dont overtighten as with the foam it can crack the print (I used PLA). the 12mm screw was used in place of the factory screw that was removed.

Tagi