Bambu X1C Exhaust Adapter for 63mm (2.5in) hose
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed @Wolfie3D_373632's model to accomidate a 63mm (2.5in) hose.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 70
- Makes
- 1
- Views
- 486
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
Took @Wolfie3D_373632's fusion360 file and made changes to accomidate a 63mm (2.5in) hose. This is a straight 63mm no taper, with a 4mm wall thickness for added strength.
Thankfully he included sketches so this novice F360 user could manage the changes.
I used 3mm foam tape to seal the edges against the back panel, three M3x10mm screws and one M3X12mm. With a little force you can cut threads into the unused holes on the back panel which is what I did, just dont overtighten as with the foam it can crack the print (I used PLA). the 12mm screw was used in place of the factory screw that was removed.