1 / 2
Creality K1 Rear exhaust pipe connection 38mm — zdjęcie 1
1 / 2

Creality K1 Rear exhaust pipe connection 38mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An exhaust adaptor for use of a 38mm pipe

Ocena
0 / 5
Polubienia
27
Pobrania
181
Wydruki
0
Wyświetlenia
685
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I've made a right angled exhaust pipe for the Creality K1 for use of a ID 38mm pipe for those wanting to vent their printer due to smells & VOC's

The stock fan isn't that powerful so 38mm is still fine for air flow to remove some smell & heat from the chamber.

Simply, remove 2 screws from the fan inside the printer, diagonally preferred, and use them on the back to install this attachment. 

I'm using it with THIS Venting slot to put in my window. 

 

38mm hose ca be from a hoover pipe or Pond Corrugated Flexible Hose (Amazon)

 

Pretty much it.

Tagi