Liczymy pasujące modele…
Heavy duty buckle used to level up my laptop bag with a more industrial look. The buckle is super strong, easy to install on an existing bag without the need to sew. I'm using it on my daily laptop bag and it works well. Straps are easy…
Simple part designed to connect 38mm Festool Dust Extractor hose to M18 sander.
🔧 Rear View Mirror Mount for 38mm Roll Cage – Locost Build Upgrade your Locost or lightweight build with this 3D-printable rear view mirror mount , designed for a secure and adjustable fit on a 38mm roll cage . 🏎 Features: ✅ Secure Fit –…
MOCK SUPPRESSOR TRINITY 14mm CCW THREAD (most common) 150mm lg 38mm diam. Built in two part with an I.D. of 32mm. This supressor is designed to be use with internal foam to supress the sound of gas airsoft bb gun.
I have several blinds around the house that use the Eve Motionblinds upgrade motor. My issue is that for the 38mm tube, especially the single slot version, positioning the motor centrally in the tube can be hit and miss. The motor itself…
It's an adapter for 38mm vacuum tube It works better if printed in TPU
A spiral vase with a small lip to keep it strong while beung printed in Vase Mode
Lomo 38mm lens(from LCA120&instant glass) to No.0 shutter conversion
An Ikea Skadis holder for 38mm glue bottles. Remixed from https://www.printables.com/model/517582-gluegluestick-mount-for-ikea-skandis Requires supports to print.
This is a re-remix oft the following great works: (Thanks to all the effort you‘ve put in the design!) Original: by ExtRuben https://www.printables.com/model/841041-automatic-portafilter-cleaning-device 1st Remix: by Freedie B.…
這是一款為水耕系統設計的 極簡風定植籃 ，以乾淨俐落的結構，提供根系最大的生長空間。 整體採用高透通設計，側邊大面積開孔，有助於： 根系自然伸展、不纏繞 提升水流循環與含氧量 降低積水與悶根風險 適用於 3.3cm～3.8cm 直徑開口 ，常見於 DIY 水耕箱、育苗盤、3D列印水耕盆栽等系統。 簡約外型不搶植物視覺，特別適合生菜、香草、草莓等小型作物。 This minimalist hydroponic net cup is designed to provide a…
This is a simple mount to attach a Reolink RLC-810A to a 38mm or 50mm mount originally intended for a satellite dish. It requires the following hardware to assemble: 7x M4 heat set inserts (Ruthex or CNC kitchen) 4x M4x20 screws 3x M4x12…
a rocket motor retainer used for keeping a rocket motor in the MMT, fits 38mm LOC tubing. I plan to release more sizes later. I printed the retainer bit in PLA as that's what I had, the cap should be printed in PETG as its going to be a…
This is a mount for the Reolink TrackMix PoE for a 38mm pole, which is how I have mounted it to an old satellite dish mount on the side of my house. I have used "TPU for AMS" for this as it is stiff enough to sit flush with the camera…
A set of various hooks for pegboards with 10 mm square holes spaced by 38mm, branded as Magnusson, Wolfcraft and other. As usual with my models, I made them editable by a spreadsheet in FreeCAD = you don't need paid software to edit them…
Dis ist eine kleine lötzinn spuhle Category: Electronics
Um die Temperatur des Pool-Wassers zu bestimmen, wollte ich kein Kabel im Wasser haben oder ähnliches. Ich habe diesen Adapter für unsere 38mm Poolschläuche entworfen. Der Fühler kommt in eine mitgelieferte Hülse, mit einem ½ Zoll…
Paper Towel Holder for 38mm Tables Category: Kitchen & Dining
Here is an adapter mount to install this setup on pole stands 38-44mm.
Made to hold a tray like this one . Also works well with the original tray from Feedback Sports. Without shims, the mount will fit over a pole with ~43mm diameter. The two shims are each ~1.6mm thick. They allow a snug fit onto a 38mm…
An add-on tray for a bike stand or similar vertical pole with a 38mm to 44mm diameter. Adaptable with shim inserts!
The hooks on this V1 are less sturdy than the redesign here .
An add-on tray for a bike stand or similar vertical pole with a 38mm to 44mm diameter. Adaptable with shim inserts!
A basic 235mm square work tray for a bike stand or similar with a 38mm post.
An add-on tray for a bike stand or similar vertical pole with a 38mm to 44mm diameter. Adaptable with shim inserts!
Three versions. Wide and narrow vertical print. Or trimmed horizontal print. I went with the wider vertical version and learned a few things. I printed in PLA+ without brims and couldn't find the print after it had finished. LOL. It was…
This oil seal installer helps to evenly drive oil seals into place. There are three lengths here to help clear the shaft. You can also run a bolt through the center to help apply even pressure to the seal. This exactly fits: Toyota Type T…
Vielleicht kann einer von euch den Deckel gebrauchen, er ist für ein KG Rohr DN125
Ich bin begeistert von diesen HULA System, ich habe mir Adapter entworfen die ich auf die Standard Füße stecken kann. https://makerworld.com/en/models/417509#profileId-502157 obj_66_240702 HULA V1 uni core Passt auf diese Teile…
I designed this simple pipe clamp to attach a heat lamp to the winding table, so I could avoid the bulky base plate.
I made a Fly Away Rail Guide for my 38MM Loc minimum diameter rocket. Just add small rubberbands. Untested as of now. Does need supports. I use .35mm (most measured settings) and snug in Orca slicer. I also printed it with 60% infill for…
Heavy duty buckle used to level up my laptop bag with a more industrial look. The buckle is super strong, easy to install on an existing bag without the need to sew. I'm using it on my daily laptop bag and it works well. Straps are easy…
Desktop Cable Gland designed for a hole of 38mm. I designed that Cable Gland so I can use on a hole that I made on the drywall of my office to organize some cables. Printed using white PLA Also added a cover with no hole so it will be…
Birdhouse peg for fence marten . Fits to marten with inner diameter 38mm Just screw the print to the bird feeder( or others) and slide into the fence marten.
Here is a jig for a 38mm pipe bend. This jig is made up of two part connected with two M5 allen bolts and nuts. It has markings for every 5 degrees but you can also use a protractor to set the angle of the bend. I made this in PETG so it…
Material: PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 50 % / Support No Slicingtoleranz “EXKLUSIV” (Cura) Zusätzliches Material / additional material: Wurmschraube / worm screw DIN914 5/ M6x7mm Gutes Gelingen und über ein Like…
Quick-Grip 38mm Replacement Pad. They broke so I made some more. Work well and have lasted through some serious abuse. Print instructions Category: Hand Tools Print Settings Printer Brand: Original Prusa i3 Printer: Prusa MK2.5S Rafts: No…
Simple part designed to connect 38mm Festool Dust Extractor hose to M18 sander.
Model of the 7.62x38mmR Nagant cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be…
Model of the 6mm AR cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be ligth and…
A connector to connect a 38mm hoose to a 50mm hose or dust extractor. Originally esigned for use with Metabo TS 254 M table saw and Ozito shopvac, but it will probably work on many tools and vacs TPU is ideal because it allows you to…
This project started as a light diffuser for my phone and became a simple snowball shape light diffuser for winter time. Its easy to fit one LED candle inside it. Print a couple and you have soft lighting around the table or else where at…
Two tools for measuring & cutting 4mm or smaller LED fiber optic cable, or any other round material that is less than 4mm in diameter. Use a razor blade to cut to length. One tool does 5-37mm. Other does 6-38mm.
Saugerdapter DN50/DN40 zu Staubsaugerschlauch innen 38mm Das Gewinde sitzt sehr fest und dichtet sauber ab Vacuum cleaner adapter DN50/DN40 for vacuum cleaner hose inside 38mm The thread is very tight and seals cleanly
РУЧКА ХОЛОДИЛЬНИКА. РАССТОЯНИЕ МЕЖДУ ОТВЕРСТИЯМИ 238ММ
A cable clip for the Metabo ASA30 vacuum hose (38mm diameter). This is useful to route a Tool cable via the vacuum hose. It prevents tangling of these to cables ones typically has to handle when a tool with suction is used.
This is a simple clamp which tidies any electrical cable which has to run alongside a 38mm (1.5") vac hose - perfect for CNC dust collection or any power tool with a vacuum port. I have a version for a 50mm hose <AT THIS LINK> I've…
I have all these leftover OTC plastic bottles that I use for storing hardware, and I wanted a nice, organized storage setup for them. I arbitrarily set this for a 4x3 holder, but can likely be scaled to something more. I didn't pay close…
スカッシュボールが高いので、 こちらのモデル を38mmのスーパーボールに合うように変更したものです。 38mmのスーパーボール はアマゾンで購入しました。
Print Settings Supports: No Resolution: 0,20mm - 0.30mm Infill: 15% Filament material: PETG Nozzle: 0.4mm
One of ours broke so I made a printable version. Printed with PLA, will see how long it holds up against the UV rays. Steps and Fusion included.
fabrication sans support ;avec une vis M5 x40 et un insert laiton m5 8x7
Wall mount for 120x 38mm delta pc fan (non standard fat fan!!!) made for afc1212de(Y4574) fan. Requires: M8*12 hexagon head bolt M8 Nylock nut M6x34+ hexagon head bolt M6 butterfly nut Fan grills M4 screws to mount fan grills/attach fan…
Print flat for optimal strength. The underside fillet might not print perfectly but it can be easily fixed in post. Pictured as used for hardware on a DIY packraft (1" version). For permanently sewn or welded-in fixtures that will be hard…
Marked this NSFW because people have strong feelings about ash trays. Really. Tl;dr version: A cover for a fairly common glass ashtray configuration of 85x38 (more or less) ash trays like those:…
🔧 Rear View Mirror Mount for 38mm Roll Cage – Locost Build Upgrade your Locost or lightweight build with this 3D-printable rear view mirror mount , designed for a secure and adjustable fit on a 38mm roll cage . 🏎 Features: ✅ Secure Fit –…
I liked the original model but i wanted to make a smaller one to reduce time and material used.
One of the kids broke the lid on one of my herb / spice jar/bottles from Woolies here in Australia, of course everything online is for 30mm, where as the typical Aussie one is 38mm. So I made a 38mm one for us Aussies. It fits the woolies…
MOCK SUPPRESSOR TRINITY 14mm CCW THREAD (most common) 150mm lg 38mm diam. Built in two part with an I.D. of 32mm. This supressor is designed to be use with internal foam to supress the sound of gas airsoft bb gun.
A case/shroud to snap the official SlimeVR extension tracker into. Also includes a printed case that replaces the official case if needed. Unscrew the two philips screws on the bottom of the official case, remove the pcb and insert it…
Jewelry Gold System Hydraulic Piston TPU seal, I.D. 138mm O.D. 158mm Especially designed for Jewelry Gold foundry machine, it's usable for all hydraulic piston that need a spare seal. You can scale it as you prefere to get a customized…
Vacuum hose adapter for the Original Carvera (Not AIR) and the Fox Alien HFS-800 dust exctractor. Should fit any 38mm OD vacuum hose. Fit snugly for me on both sides but you may need to fiddle a bit with scale to get the proper fit out of…
Follow the guide by @CreativeJE_213603 - https://youtu.be/2xLQ9wforAc building the fume extrator. fan I'm using, aviable in latin america (mercadolivre) - link fan available amazon USA - link IMPORTANT: Add a Negative part to make a…
It's super simple. I originally designed a simple box with a lid for storing pencils, pens, and paintbrushes. https://www.printables.com/model/619803-simple-storage-box-with-lid-for-paintbrush-pen-pen I was looking for a small storage box…
I was graciously gifted a plunger tube. However, it didn't match exactly the suggested 1 ½" OD 1 3/8" ID tube. Instead, it was 38mm OD and 35mm ID. To adapt for this, I enlarged the O-ring areas on the plunger & front so that it would…
Since my tool/pegboard have 38x38mm grid pattern, I wanted to print a mounting bracket to fit my chargers there. I staggered the mounting tabs, so you can install the chargers as tight as possible side by side. Installation requires: 2pcs…
Printed with PLA. Model allows single extruder to print multiple colors all flat that once complete can be folded into a cube. The sequence I used required minimal change of settings. Settings for all prints. First layer height: 0.2mm…
Bazénové odpaliště pro můj bazén Bestway 15' Quickset pro propojení dvou 1-1/4" sacích potrubí s 2" potrubím pro nový filtr a čerpadlo.
This is using the 20mm connector and the milk bottle funnel lid mashed together in windows 3d builder. For using Milk bottles with bird food. Remix combining https://www.thingiverse.com/thing:4327797 and 20mm connector from…
Had some 120mm x 38 mm fans so I modified the 120mm housing a bit to accomodate this with the help of inserts.
Jakejake's design works great! In order to free up my quick release plate, to leave it on my DSLR, I made this remix to add a plate to his design. I have two tripods, with different heads that fit this version which has an integral quick…
Warning: The current version of this belt broke after just a day and a half of use. The limiting factor appears to be tensile strength. To address, I'm considering polycarbonate filament and/or even thicker extrusions. Use the models that…
Adapter for using newer style 38mm reduction lens in an older amscope microscope with 28mm photo port. This may work for other microscopes that have a 28mm photo port. Finally bit the bullet and ordered a camera for my microscope, figured…
Rather than using the 38mm adapter to accept a vacuum hose from below, this 90 ° adapter accommodates a vacuum hose from the side. This likely needs to be printed with support.
This is a remix of a design on thingiverse by user justinsprecher (linked below). I remixed his dart cutting jig to cut 38mm long half darts instead of the original 36mm length his jig used. I really liked his design, but 38mm darts are…
Vacuum cleaner adapter for Lego and other small parts that we don't want to loose. Use standart printing profile.
Very specific design for that particular stand, but you can adjust in the F3D. Comes with two pieces, one that has a hole (for securing screw) and a rim – the other slides into the stand pipe. Printed in PETG to withstand sun and weather.
Abschlusskappe für ein DN75 Rohr um ein 38mm Poolschlauch durchzuführen.
Super simple, no frills adapter to connect a Festool hose to a 38mm dust port on a Craftsman router.
Enclosed version of my Gardena Gutter Adapter Water Collector with direct connection to a watering hose. Clips into 38mm gutters and holds in place. Gluing it to the gutter might be needed in case the hose is not fixated and can pull the…
Pool Schlauchschelle 32mm / 38mm zur Wandmontage
For 38mm high powered rocket motors the polycarbonate retainers can be difficult to install and remove if a minimum diameter tube or a boat tail is used. This key slips onto the retainer and provides tabs which can be used to install and…
Windshield funnel made for my 2021 - model 3, wanted something way easier to pour into. the OD of the base of the shaft is 38mm and the funnel max diameter is 125mm I recommend printing in petg funnel down on the build plate with no…
I wanted a fancy pedestal for my Glow in the Dark D20 (38mm), so I designed this! Could be scaled up to fit larger dice, although the smaller details may be lost if printing at a smaller scale. Example printed on Creality K2 Plus in Hyper…
I needed this for a lemonade stand. I used a 38mm hole saw through some plywood and it fit like a glove.
Designed to fit: Treston perfo panel with 9x9mm pitch 38mm square holes Bott and Kraftmeister perfo panels with 10x10mm pitch 38mm square holes Treston panel is 2mm thick steel, Bott panel is 1mm thick. For both panel styles added…
This is a coustom 38mm Avionics bay designed for the Featherweight Altimeters GPS tracker. Assembly is very simple, first you take the threaded insert and epoxy it inside the 38mm nosecone of your rocket and then you can thread in the av…
Take your intake setup to the next level with this custom 3D printed adapter, designed to fit a VM22 carburetor with a 38mm (1.5") air filter inlet and adapt it seamlessly to a 2-7/16" (62mm) K&N-style air filter. Whether you're tuning a…
German follows after English. Since the internal mini filters are not sufficient to completely filter the water, I designed a complete conversion for MSPA Aurora-type whirlpools or comparable pools with similar wall thicknesses (approx.…
This is a pipe holder for pools which are converted to Ф38mm pipes (like in the photo)
Hallo, für alle die ein Festoolgerät mit einem normalen 35mm Absaugschlauch betreiben wollen hilft dieser Adapter. Somit kann man sein Festoolwerkzeug auch ohne Festool schlauch tip top absaugen. Druckmaterial ist TPU
Adapter to use ø50mm Pool components like automated PH systems with ø38mm Pool hose, so it is a Adapter from 38mm to 50mm and back to 38mm. Print with PETG and 50+Infill and supports. If you like this model check my “pool” Collection with…
Pool Schlauchverbinder 38mm /Pool hose connector 38mm
