Osmo Pocket + Wireless module Tripod adapter

The wireless adapter slots into the base from the back, and the Osmo pocket slots in from the top.
There is an opening for the USB charging cable to be connected from the front.

The model is designed to print without any support with any regular printer/material combination, as long as you can bridge 20mm and print overhangs 45 degrees or less (this should be easily achievable for most any printer/material)

I have included two different versions, one “short” standard version which already is very secure, but the fit in the wireless adapter is what holds the Osmo pocket, and one “tall” version where the Osmo pocket sits much deeper and the smartphone adapters functions as a lock which prevents it sliding out even if you turn it upside down and shake it, but this also means that you have to remove the adapter to slide the Osmo pocket in/out.

I've been using the tall version in combination with a Manfrotto superclamp to mount the Osmo pocket on the railing on the back of a boat.

For the standard version you will need one threaded insert (1/4"-20x12,7), I used the dimensions of the ones from Ruthex or CNC Kitchen. 
I have included a version with a printed thread if you want to avoid the threaded insert, but it will wear faster and it is not going to be as strong.

I 3D-scanned the wireless adapter with the Shining3D Einstar and reverse-engineered it in Fusion 360, this is the adapter you see in the rendered pictures.