Liczymy pasujące modele…
This is an enclosure for the Arducam 1080P Day & Night Vision USB Camera Module (SKU: B0205) which is a nice camera USB with auto-switching infrared night vision. The back of the enclosure has a mount that works with the Modular Mounting…
2020 Aluextrusion Webcam Mount for AUKEY 1080p Webcam Since the Waveshare OV5648 are difficult or expensive to get, I drew a housing for a cheaper variant of a webcam. The AUKEY PC-LM1E 1080p Webcam is a cheap webcam that uses a…
Eufy Camera wall Bracket for Indoor Cam Pan & Tilt 2k and 1080p Simple bracket to attach your Pan and Tilt camera to a wall. Bracket works by fixing the mounting plate that comes with the eufy camera to the bracket using the two m3 6mm…
When I upgraded my TRX-4 ESC to a Hobbywing 1080, I found several mounting plates, but none had an external lever switch like I had been using with the original Traxxas ESC. I've combined Puredeath's excellent TRX switch(…
This minimal mounting for the Inno-Maker 1080P camera is excellent and gives a great view to monitor your printer, I designed it for my Voron but it will work on any 3d printer really, as long as you have a Raspberry Pi with a free USB…
Nice and compact mount for the awesome HobbyWing WP 1080 ESC and power button to fix it in the Traxxas TRX-4. Will fit both the full version (with shift servo) and Sport models. Designed to reuse the screws and holes that hold the…
This is the Pendrive Case by Bramesh501, but way smaller. Most normal USB Flashdrives still fit in. I put the USB stick that comes with the Ultimaker 3 inside and it fits perfectly. I Suggest you check if the USB you want to put in fits.…
Quick ~40 minute print to get yourself a nice Hobbywing 1080 ESC and switch mount. Will fit Sport and Sport Kits models - without a 2-speed servo installed. Pictured installed on a Sport Kit.
A 3D printable shroud for the MSI GTX 1080 Aero 8G OC gpu. The shroud can be mounted in the same mounting points as the original shroud. The dimensions are also nearly the same as the original. For me, the best quality was achieved by…
Hardware: 6x M2x6 countersunk screw (ISO 10642, DIN 7991) 8x M4x20 countersunk screw (ISO 10642, DIN 7991) 8x M4 nut (DIN 934) 3x Noctua NF-A9x14 PWM fan (or equivalent) Print instructions: Use a material that's capable of dealing with…
This model works with many cheap 1080p webcams that use a 55x19.5 mm PCB with three mounting holes. This gives a significant increase in resolution, and for many cameras brightness as well. Additionally some cameras have an adjustable…
Adapter für den Abricht- Dickenhobel. Ich verwende diesen mit einem Festool 36mm Schlauch. Die Muffe ist ca. Ø45mm
This is a custom remix of the https://www.thingiverse.com/thing:2751705 ELP camera enclosure. In this case this is for the 1080 version with 90º Lens, with thinner walls and space for the screw. For this specific camera…
This is a Rain/Weather cover for the 1080p and the 2K Eufy doorbell versions. There are hybrid version to allow either model to be fitter as the 1080p and the 2K doorbells are different sizes.
First thing, many thanks to testudor for the original kit, this mod is a life saver. To be clear first, you can mount any 92 mm fan to the original frame, as long you can make it work. But the frame of the be quiet fans were in the way of…
Adapter for Asus Rog Strix GTX 1080TI graphics card. It allows the mounting of 120mm diameter fans. The .3mf file includes holes for fan screws and a properly trimmed model. The .stl file contains just the adapter model for custom…
I have a newer model https://www.printables.com/model/392851-bambu-lab-p1p-camera-mount-for-nest-yi-and-blank
The is a 3 point adjustable mount for the Optoma GT1080. http://www.optomausa.com/projectorproduct/gt1080 The projector has such a short throw that it's great for setting on my bed and watching movies on the wall. However, the projector…
This is an enclosure for the Arducam 1080p Day/Night USB camera . I needed to make a baby monitor for someone and had a raspi zero 2 and arducam to get started . Here’s an enclosure that uses (4) 16mm M2 screws and heat inserts. My board…
Retoque el modelo porque la cámara tenía mucho movimiento una vez puesta y le faltaba más ventilación para que no se cal
The cover slides easily on and off the lens. The scad file is configurable in terms of spacing. I also added my own kind of elephant foot compensation because it often affects more than one layer and it really hinders the sliding…
I made this support for my Aukey 1080p webcam, to monitor the printer via octoprint. If you download or collect any of my designs, please like me!
This Predator 1080 Cue Chalk Holder is a compact and functional accessory for pool and billiards enthusiasts. It’s designed specifically to fit Predator 1080 chalk snugly, keeping it protected when not in use. The snap-fit lid prevents…
Attention This project is still a work in progress and is based on a MFT 800 work bench. While I have printed and tested all the files, there may still be issues, If you notice anything amiss, please let me know so I can address it. Not…
Hello. I need to “repair” my 1080Ti fans because they started to make some weird noises and low the rpms, temperatures go higer, and… why no temperature and noise reduction upgrade ? First I want say the photos are of the first functional…
A remix of @Czario_2210257 model for a "cleaner" look for my own preferences. Set Z-axis to 3.81mm before printing
This custom stand was designed specifically for Edifier speakers, offering a perfect fit and a clean, functional look. With a height of 16 cm, it positions the speakers at the ideal level for improved sound projection. The base matches…
Privacy Cover for Spedal 1080p WebCam
UPDATE : I created a new version, because people were able to brake this version → https://www.printables.com/model/822135-improved-webcam-cover-for-terra-webcam-jp-wtff-108 ---- A very simple and basic cover for the TERRA Webcam…
Snap fit enclosure for this camera: https://www.arducam.com/arducam-1080p-day-night-vision-usb-camera-2mp-infrared-webcam-with-automatic-ir-cut-switching-and-ir-leds.html Print Settings 0.2mm PETG, 15% infill (default quality profile in…
Fits to the left side gantry, ideally with a couple of magnets. Use short M3 screws to secure camera and adjust the angle. Remixed to fit the UVC camera module pictured. It supports hardware MJPG encoding.
Camera Mount for Voron 2/Trident or 2020 Profile. Step & F3D file included
An updated version of my previous design. Easier printing , better finish of the front side, less support needed and stronger too. The previous version had some issues with deformation over time. I have this version for 2 years and with…
An adjustable mount for a de-shelled Creative Live! Cam Sync 1080p V2 that fits on a 2020 extrusion. Model was designed for a V2.4 to be placed inside the printer. Limit the max z height to 260 when printing high prints that cover the…
This printable adapter and sensor holder set is purpose-built for the expLORA METEO wireless weather station. It combines a ventilated electronics housing with a sturdy mast bracket so you can log temperature, humidity, pressure, wind…
So far I only found external switch for original Traxxas ESC. Current model accommodates the 1080 ESC and the power button. Also the button can be actioned by a lever protruding between chassis and sliders. Main difference is that lever…
A simple 10" rack mount for the Asus QG-U1080 2.5g Switch, I've used it in a deskpi rack. There are two pieces, the backing plate is to ensure the router does not move when plugging things in. The backing is secured with 2 x M3 bolts, I…
This is a component (part 31 or 25 on the explosion chart) of the fence holder for the original MFT 800 /1080. All the other components are available to order as of 07/2021. You can gain a few centimetres of cross cut capacity by using…
This is an adapter for the MSI 1080ti ARMOR 11G that allows you to replace the loud and inefficient stock fans for some 120mm ones of your choice. Category: Electronics
Radiation shield mount with fan for cheap weather station kit: https://www.hadex.cz/t110-vnejsi-mechanicke-dily-k-meteo Separated to parts, no supports needed. Print from UV resistant filament - ASA or PETG for example Parts needed: 4020…
Please like and download this model, It helps me justify the time expense. Sneaks compatible case for Arducam 1080P Low Light Low Distortion USB Camera Module with an M12 lens. AKA the UC-B18 SKU B0468 (2MP IMX323) Amazon ASIN B0CGLW3Z1N…
After my first version survived a couple of months in our office, some colleagues managed to break it by … I don't know what they did. But an improved version was needed. Sadly, I used Shapr for the first version, so adjustments were hard…
A cup to hold the Amcrest 1080p (ASH21) camera with adjustable pitch. A solution for aiming the camera down (over a ledge) without the need to mount it on a veritcal surface. Legs can be assembled with feet inward or outward – depending…
3D Model of the Arducam Day-Night Vision Camera (Fisheye) OV5647 5MP linked below. LINK: https://a.co/d/fcFQiCM
Tight and useful seat for switch ESC Hobbywing QuicRun 1080 (the best brushed ESC)
This replaces Sterling part number Replacement part number 1080397, Front Bushing, which allows the door to slide on the track without metal-on-metal friction. The OEM part comes with a piece of foam for the top of the bushing to prevent…
This is a modification of 6d6178 's “ Arducam B0205 1080P Day & Night Vision USB Camera Case ”. I've made the screw recess on the front deeper to accommodate a shorter screw, and increased the size of the opening to accommodate larger…
Two versions of cover for HDC 1080 sensor board - with and without top holes for M3 mounting screws. My particular board dimensions are ~ 15 x 15 mm. More details on that on drawing (dimensions are appropriate bigger for not too tight…
Mount for tp link Deco WE10800 Print Settings Printer Brand: Creality Printer: K1 Rafts: No Supports: No Resolution: 0.2 Infill: 8% Filament: MatterHackers.com pla white Notes: Mount for tp link Deco WE10800 Category: Computer
je trouvais le design intéressent de l'AngryCam de chri.kai.in ( Voron Mods - Angry CAM USB by chri.kai.in (vorondesign.com) ), mais je ne trouvé pas la caméra utilisé de bonne qualité. J'utilisais une webcam récupérée sur un ancien ordi,…
esc for mock up. no wires Category: R/C Vehicles
I make a holder for Mi Home Securite Camera 360° 1080P. I use Mi home camera support lock from this https://www.printables.com/cs/model/265039-mi-home-camera-360-support-xiaomi/files and this Nuts for M3 screws…
Privacy cover for TERRA Webcam from Wortmann. For the joint, a short piece of 1.75mm filament is pushed into the hole. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.2 Infill: 20% gyroid Filament:…
This is a 1515 mount mod for the Webcam Case for a cheap AUKEY 1080p Webcam.
Simple mount for XiaoMi Mijia XiaoFang 1080P Portable Smart IP Camera. Basically, a tiny shelf that ca be mounted to a wall, window, or other flat surface. The XiaoMi Mijia XiaoFang 1080P Portable Smart IP Camera can be mounted to the…
As the dimension of pocket_mount.stl did not fit my camera (Trust Gaming GXT 1160 Vero Webcam), ive created a custom one
I designed this to hold a soundbar on edge behind a monitor. Designed around a Yamaha ATS-1080, but should work for similar size soundbars.
This is a simple camera mount for a Ugreen 1080p camera for my RatRig vcore4. You need two M6x12 screws and one M6 T-Nut which should be left over after the build. It can be used for any 3030 profile. I included the CAD file, so you can…
Hey guys, this is my very first thing I created on my own. I hate it when my graphics card bend to the bottom because its too heavy. So I created this graphics card holder to hold it right in the way. This holder ist designed for the NZXT…
Playmobil kompatible Jukebox Wurlitzer 1080
Here's a basic case to protect your Manga Screen 2 (Big/5.9"1080p) . The LCD will slide into the "Front" model & the "Back" model slides over the existing LCD mounts on the rear. Use four M4 bolts to clamp everything together.
Rhastlyn's Wansview 1080p camera mount works well if you want top mount, if you want a bottom mount for your 2.4 with aTinyShellScript's AWD conversion / mod then you need this mount. Print, mount camera to the printed part then install…
A Wall-Mounted Optoma 1080 Projector Remote Holder is a convenient storage solution designed to keep your Optoma 1080 projector remote securely mounted and easily accessible. This holder attaches to the wall with screws or adhesive,…
This mount is designed for the now ancient Contour HD 1080p action camera. The mount itself is designed to be easy to print and universal. It features a snug fit with the camera, 4x 3mm Ø screw holes, 2x passthrough channels for <4.5mm…
I upgraded my previous version of button holder and added hole to tight install programming cable (Male-Female) for ESC Please don't forget to waterproof this cable before installation with silicone or something similar And use rubber cap…
After using the VESA mount in my monitor, I was left with a heavy chunk of metal to recycle.
dopo che mi si è rotta la manovella per la regolazione dell'altezza della lama del mio primo banco sega ( Einhell TE-CC 1825 U ) mi sono subito adoperato nel clonarla. i pezzi di riferimento sono i seguenti: pt n° 434055001080 +…
Diagonal Dimension : 5.0 inch Resolution : 1080x1080 pixel View Direction : - Touch Mode : None Module Dimension : 136.531(H)x132.208(V)x1.98(D) mm Viewing Area : 127.008(H)x127.008(V) mm Supply Voltage : 1.8 V Interface : 1/2/3/4-LANE…
This is a Webcam holder for the "Wansview 1080P" on Anycubic 4Max pro door. The webcam is avaiable for very cheap (got mine for ~10€ on Amazon , but even for the normal price ~20€ it is OK. You need to remove the original housing from the…
Diagonal Dimension : 5.0 inch Resolution : 1080RGB x 1080 pixel View Direction : All Touch Mode : None Module Dimension : 136.531(H) x 132.208(V) x 1.98(D) mm Viewing Area :127.008(H) x 127.008(V) mm Supply Voltage : 1.8 V Interface : -…
This is a remix of urbanvanilla design that lets you mount the Yi 1080p camera to the Prusa XL extrusions while having the Enxlosure, I modded 3D_Pfuscher bracket to fit with the “Lego” tower build, You need to print all the parts and…
Print: For a multi-color print (as in the example photo), three layers are needed for the “Cover”. The heights of the layers are: 1mm, 2mm, and 1mm. Assembly: The slit for inserting the cover into the main part is exactly as wide as the…
This camera is very cheap (25€ in Amazon Spain) and has a good quality, it has been used on a raspberry pi 3 b with klipper and the standard camera configuration. The problem is that the stock housing is too big and includes a tripod…
GTX 1080TI logo that goes on EKWB, covers up the internals Category: Computer
Reduction for expLORA METEO Reduction for extending the original pipe to the side.
Basically this is a small adapter that is meant to pass through the camera leg to be mounted to an arm with a screw.
This duct allows a 1080 Ti SC2 to draw fresh air into a Fractal Ridge. No case fans, no recirculation, no excess noise or heat. Install to case with M3 buttonhead screws and heatset inserts.
Simple, easy-to-print, pan-and-tilt adjustable mount for Arducam B0205 1080P Day & Night. You will need an M5 bolt and nut for the pivot, M2 bolts and heat-set inserts or nuts for the camera, M6 bolt and T-nut if you're mounting to the…
I made a simpler case for a cheap webcam bought from aliexpress . It's smaller and less obtrusive, mounts slide into my DELL monitor vent holes. Far from perfect, but good enough ;)
Innomaker U20CAM 1080p USB Camera Enclosure A custom-designed, 3D-printable enclosure specifically made for the Innomaker U20CAM 1080p USB camera module . The enclosure provides a compact and practical solution for protecting the camera…
Ersatzteil für die Radbefestigung bei einem "Revell Stunt Mini 1080" Fahrzeug. Bei unserem Fahrzeug ist die Befestigung eines Rades gebrochen. Man kann das ganze Auto gut aufschrauben. Vorsicht beim Öffnen der Antriebsseite. Das…
Gehäuse für den 8-fach Schaltdecoder der Firma DECODERWERK
A remix of @Czario_2210257 model for a "cleaner" look for my own preferences. Set Z-axis to 3.81mm before printing
Designed for 3030 extrusion printer frame but works with any profile that can take M3 hardware. Hardware required: M3 heat set insert M3 x 6 to 10mm flat head M3 x 12mm socket head for 3030 M3 T-nut for 3030 Print without supports. Heat…
This duct allows a 1080 Ti SC2 to draw fresh air into a Fractal Ridge. No case fans, no recirculation, no excess noise or heat. Install to case with M3 buttonhead screws and heatset inserts.
This mount is designed for the now ancient Contour HD 1080p action camera. The mount itself is designed to be easy to print and universal. It features a snug fit with the camera, 4x 3mm Ø screw holes, 2x passthrough channels for <4.5mm…
My settings: Layer 0.4mm Infill 100% Ill be happy if you share your print and rate it in the comment section :)
Optoma 1080 Projector Rear Feet Holder is a custom 3D-printed accessory designed to support and stabilize the rear feet of an Optoma 1080 projector when mounted in a Projector enclosure.
Simple stand for attaching to wall. Cable guide for each side, depending on how you use it. Has three 4mm holes for screws.
I used this bracket to mount the GPU to a mirror. Mirror in the picture is from Ikea “ DVÄRGSYREN” holds perfectly with 6 M2 x 20mm screws.
This is a modular webcam mount with a 15mm span to fit the cheapest (currently $6) unbranded hardware encoding webcam found on amazon. The "HUICCN HD 1080p". https://www.amazon.com/gp/product/B089N79LKR/ Print Settings Printer Brand:…
XiaoYi 1080p camera mount for ender 3 (v1, not pro). Fusion360 file provided in case you want to remix it. I added a bunch of parameters so it's easier to tweak it. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
Remixed from the 1080p usb webcam upgrade made by @RobertSamples_345778 . Changed the magnet holes at the rear to 6x2mm. **Original camera was no longer available, i purchased this webcam on Amazon and it fit perfectly**…
Designed for 3030 extrusion printer frame but works with any profile that can take M3 hardware. Hardware required: M3 heat set insert M3 x 6 to 10mm flat head M3 x 12mm socket head for 3030 M3 T-nut for 3030 Print without supports. Heat…
Original camera was no longer available, so I purchased this webcam on Amazon and it fit perfectly. https://www.amazon.com/dp/B07QP6G5JV (no affiliation) I also spliced a ZH 1.5mm socket (the connector with visible pins) to the end of the…
The mount and housing are printed separately and then glued together. I attached it to the printer frame with double-sided tape. The power supply needs to be 5 volts. You can power it from the screen, but I used the printer's power…
I made this Yi 1080 camera mount for my ender 3 pro. So I can watch my printer while i'm not home... Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: amz3d PLA Black…
LSC SMART CONNECT 1080P Magnetic Camera Mount for Remote Filament Status Monitoring Material: PETG Magnets 8 x 3mm - 8 pieces The holes are tight, so it's best to tap the magnets in with a rubber mallet The screw thread should not exceed…
Mount for Yi Camera (1080p) for Ender 3 V3 SE. The mount can be mirrored. This model allows you to clip on Yi Camera to your printer without using screws (original requires longer M5 screws). Printed using ELEGOO RAPID PLA+ | 0.2 layer…
