AMS Riser for ARC Enclosure (new version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AMS riser for Bambu Lab P1P with ARC Enclosure for new AMS version (2024) with top panel holder
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 421
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Hello.
I recently bought an AMS and could not find a riser that could fit my P1P with ARC Enclosure. I found one that could be exactly how I wanted (screwed in the ARC itself) but it could not fit due to the new version of AMS being with different plastic spacers on the bottom.
I changed the plug size for the middle spacer while keeping the left and right spacer the same as the original model.
I also wanted to be able to keep the top panel open so I edited the model to have a little piece of plastic to hold the panel if not needed to be closed.
You will need, apart from the 3D parts, 8 M3x4x5 brass inserts and 8 M3x6 screws.
The installation process is very simple indeed:
- Print all the models (I added a .3mf file with the way I oriented the parts in my printing process)
- Solder in the holes in the plugs the brass inserts
- Insert the plugs in the riser parts
- Use the screws to secure the parts together
- Screw the riser to the ARC Enclosure
- Put the AMS onto the riser
Old version (with 5 spacers on the side):
New version (with 3 spacers on the side):
Check your version before printing!