AMS Riser for ARC Enclosure (new version)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
AMS riser for Bambu Lab P1P with ARC Enclosure for new AMS version (2024) with top panel holder
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 34
- Makes
- 0
- Views
- 421
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
Hello.
I recently bought an AMS and could not find a riser that could fit my P1P with ARC Enclosure. I found one that could be exactly how I wanted (screwed in the ARC itself) but it could not fit due to the new version of AMS being with different plastic spacers on the bottom.
I changed the plug size for the middle spacer while keeping the left and right spacer the same as the original model.
I also wanted to be able to keep the top panel open so I edited the model to have a little piece of plastic to hold the panel if not needed to be closed.
You will need, apart from the 3D parts, 8 M3x4x5 brass inserts and 8 M3x6 screws.
The installation process is very simple indeed:
- Print all the models (I added a .3mf file with the way I oriented the parts in my printing process)
- Solder in the holes in the plugs the brass inserts
- Insert the plugs in the riser parts
- Use the screws to secure the parts together
- Screw the riser to the ARC Enclosure
- Put the AMS onto the riser
Old version (with 5 spacers on the side):
New version (with 3 spacers on the side):
Check your version before printing!