Phanteks HDD/SSD Drive Caddy - PH-HDDKT_02
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3.5" or 2.5" drive caddy for compatible Phanteks cases. Enthoo Pro M, Evolv ATX, & P400/P400S
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 527
- Wydruki
- 4
- Wyświetlenia
- 2643
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement drive caddy for Phanteks compatible cases. Supports 3.5" or 2.5" drives with standard M3 drive mounting screws.
Original (discontinued) mount from Phanteks :
https://www.phanteks.com/PH-HDDKT2.html
Printing Recommendations :
-------------------------------------------------------------------------------------------------------
- Material: PET-G, ABS, or ASA. (Anything that has a higher glass transition temp. Drives will regularly operate above 40 to 50C)
- Layer Height: Whatever you are comfortable with. I have printed mine at 0.28mm since this is a functional print and does not require much detail.
- Walls: 3 or 4 (Assuming a 0.4mm nozzle)
- Infill: 15% - 20%
- Orientation: Standing up as showing in the Prusa Slicer screenshot.
-------------------------------------------------------------------------------------------------------
Hardware Needed :
-------------------------------------------------------------------------------------------------------
- 4x standard drive mounting screws. (These are typically M3 screws)
- 2x #6-32 (10 mm in length) screws. (Standard PC thumb screws should work)
-------------------------------------------------------------------------------------------------------
Installation :
-------------------------------------------------------------------------------------------------------
- Mount the drive to the bracket using 4x standard hard drive mounting screws
- Remove the Phanteks drive cover on the inside of the pc case
- Press the drive bracket over the mounting hooks on either side and press down
- Screw the 2 6-32 screws in the bracket from the back side of the case
- Route cables and enjoy
-------------------------------------------------------------------------------------------------------
Change Log :
-------------------------------------------------------------------------------------------------------
- 3-17-2024 : Added photos of bracket installed in Phanteks Enthoo Pro M
- V1.01 : Decreased size of hexagons to make it easier to print. Moved drive mounts closer to base; from 2mm to 0.5mm.
-------------------------------------------------------------------------------------------------------
Original Manufacturer's Description :
-------------------------------------------------------------------------------------------------------
Modular HDD Bracket
Product Code : PH-HDDKT_02
Add a 3.5" HDD to your Evolv ATX, Pro M, or P400/P400S with our modular HDD bracket.
-------------------------------------------------------------------------------------------------------
Inspiration / Sources :
-------------------------------------------------------------------------------------------------------
This was inspired by a model from @pecuriosity_1680128 found here :
https://www.printables.com/model/789256
While this model is inspired and some of the key dimensions have been borrowed from this model, this design is my own and was created by me.
3.5" Drive Dimensions :
https://support.wdc.com/images/kb/2579-771970-A03.pdf
2.5" Drive Dimensions :
https://wiki.geekworm.com/2.5_inch_Hard_Drive#/
-------------------------------------------------------------------------------------------------------