1 / 9
Ender 3 Shroud - 5015 Fan - Magnetic Mount - JDA Improved — zdjęcie 1
1 / 9

Ender 3 Shroud - 5015 Fan - Magnetic Mount - JDA Improved

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My "improved" remix of Bosco Lau's "Ender 3 - 5015 Part Cooling Fan Duct with Magnetic Mount"

Ocena
0 / 5
Polubienia
17
Pobrania
158
Wydruki
0
Wyświetlenia
899
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is my “improved” version of Bosco Lau's fantastic Ender 3 Magnetic Hotend. I haven't made any major changes to his design, just slightly improved fitment, printability, and the diversion ratio for the print cooling fan to more evenly provide airflow from both outlets.

 

UPDATE: Tested this on my friend's Ender 3 and it works great!

 

List of changes:

  • Changed 5015 airflow duct ratio to send more air towards the longer path for more even cooling.
  • Added a small divot for 5015 fan case clips. Allows the fan to sit more flush towards the duct opening.
  • Improved overhang printability of heatsink exhaust ports on both sides, allows for printing without supports.
  • Improved back of 4010 fan mount with chamfers to allow for printing without supports.
  • Added 2nd screw hole for 5015 fan (Completely optional)
  • Lots of chamfers and fillets, fan duct, outside surfaces, part cooling nozzles, etc.

Printing Settings:

  • A “Bridging angle” of 90° is recommended so the 5015 fan duct long bridges don't sag excessively inside the duct.
  • In the .3mf file attached, I've added my recommended paint-on supports and support blockers which have worked perfectly on my Prusa Mini.
  • Medium infill percentage with 2-3 perimeters.
  • Recommend printing the base mount in a high-temperature and creep-resistant material like polycarbonate.

Tagi